【摘要】：首先,分析了齒面摩擦和一般接觸面摩擦的區別,并結合一般接觸面摩擦的測試方法分析了齒面摩擦測試的技術難點及技術要求。其次,系統地介紹了現有的齒面摩擦測試方法,包括電阻應變片法、等效轉矩法、等效重力擺法和光彈性法,并對每1種測試方法的原理、優缺點以及適用范圍進行了較為詳細的論述;從測試精度、測試范圍和測試過程復雜度的角度對比了上述幾種齒面摩擦測試方法,并指出了各種測試方法中尚未解決的問題。最后,對齒面摩擦測試研究提出了一些展望。
[Abstract]:Firstly, the difference between tooth surface friction and general contact surface friction is analyzed, and the technical difficulties and technical requirements of tooth surface friction testing are analyzed in combination with the testing method of general contact surface friction. Secondly, the existing testing methods of tooth surface friction, including resistance strain gauge method, equivalent torque method, equivalent gravity pendulum method and photoelastic method, are introduced systematically. The advantages and disadvantages as well as the scope of application are discussed in detail; From the point of view of testing precision, testing range and testing process complexity, this paper compares the above several tooth surface friction testing methods, and points out the unsolved problems in various testing methods. Finally, some prospects for the study of tooth surface friction test are put forward.
【作者單位】： 清華大學機械工程系;
【基金】：高等學校博士學科點專項科研基金資助項目(20120002110070) 國家自然科學基金資助項目(11272171) 北京市自然科學基金資助項目(3132030)
【分類號】：TH132.41

【相似文獻】

相關期刊論文 前10條

1 孫殿柱,董學朱;描述真實齒面數學模型的研究[J];農業機械學報;2000年01期

2 劉祖愈;品良;;齒，

本文編號：2308528