【摘要】：針對國內氣動三偏心蝶閥易產生嚴重的"水錘"現象,設計了一種新型偏心蝶閥結構,并對三偏心蝶閥和新偏心蝶閥的內部流場特性進行了有限元模擬分析。介紹了新結構蝶閥的構造原理,分析了三偏心蝶閥和新結構蝶閥的壓力云圖、速度云圖和流線分布圖,得到了其流量特性和流阻特性。分析結果表明,新結構蝶閥增大了小開度下的流阻系數,減小了關閉瞬間的流量變化量,減輕了"水錘"現象。
[Abstract]:Aiming at the serious "water hammer" phenomenon of pneumatic triple eccentric butterfly valve in China, a new type of eccentric butterfly valve structure is designed, and the internal flow field characteristics of three eccentric butterfly valve and new eccentric butterfly valve are simulated by finite element method. This paper introduces the construction principle of the new structure butterfly valve, analyzes the pressure cloud diagram, velocity cloud diagram and streamline distribution diagram of the three eccentric butterfly valve and the new structure butterfly valve, and obtains its flow characteristics and flow resistance characteristics. The analysis results show that the new structure butterfly valve increases the flow resistance coefficient under the small opening, reduces the flow rate change in the closing moment, and reduces the "water hammer" phenomenon.
【作者單位】： 重慶理工大學;重慶川儀調節閥有限公司;
【基金】：重慶市應用開發計劃項目(cstc2014yykf A70003)
【分類號】：TH134

【相似文獻】

相關期刊論文 前10條

1 劉建輝;;蝶閥的使用維修與檢測[J];計量與測試技術;2009年01期

2 ;大口徑全鑄蝶閥[J];技術與市場;2010年08期

3 萬木┰，

本文編號：2280075