【摘要】：目前,市場上主要的校直機種類分為兩種:液壓校直機和伺服校直機。液壓校直機由于受工作介質性能的影響,致使其加工精度低,誤差范圍大。伺服校直機利用伺服電機控制,其控制精度高、響應速度快,但是設備成本高昂�，F(xiàn)研究一種由電機和液壓聯合控制的方法,在保證校直精度的前提下,盡可能降低校直機的成本,同時避免校直過程中剛性沖擊現象的發生。
[Abstract]:At present, the main types of straightening machines in the market are divided into two types: hydraulic straightening machines and servo straightening machines. The hydraulic straightening machine has low machining precision and wide error range due to the influence of working medium performance. Servo straightening machine is controlled by servo motor, which has high control precision and fast response speed, but the equipment cost is high. In this paper, a method of combined control of motor and hydraulic is studied, which can reduce the cost of straightening machine and avoid the phenomenon of rigid impact in straightening process under the premise of ensuring straightening accuracy.
【作者單位】： 重慶理工大學機械工程學院;重慶市科學技術研究院;
【基金】：重慶市教委資助項目(KJZH17127) 重慶市科委項目資助(cstc2014pt-gc60003)
【分類號】：TH137

【相似文獻】

相關期刊論文 前1條

1 紀友哲;裘麗華;祁曉野;裴忠才;;EHA作動器的閥泵聯合控制方案研究[J];液壓氣動與密封;2007年03期

，

本文編號：2277869