【摘要】：旋轉供料器作為一種粉粒料連續輸送設備,因其具有便于控制,可靠性能強,輸送穩定的特點,被廣泛應用于副食產品加工、化學工業生產、金屬冶煉、酒業釀造、碼頭運輸?shù)刃袠I(yè),在散狀物料輸送行業中有著重要的地位。但由于我國對旋轉供料器的研究起步較晚,理論基礎研究較為薄弱,現階段對旋轉供料器的研究尚處于一個比較低的水平。旋轉供料器不同的工藝參數和結構參數都會對輸送效果產生影響,影響輸送效果的工藝參數主要有轉子轉速、物料填充系數以及輸送氣壓等。本文對轉子直徑為Ф62的拆片式旋轉供料器采用模擬仿真和試驗的方式進行研究,分析轉子轉速以及物料填充系數對輸送效果的影響,主要研究?jī)?nèi)容如下所述:(1)建立三維模型并導入EDEM模擬軟件,設定運輸參數,對離散元散體進行分析,仿真過程中設置了3個填充系數5個轉子轉速,通過研究轉子轉速以及填充系數對出料量、質量流速、輸送功率以及能耗的影響,得出轉子轉速以及填充系數對旋轉供料器輸送效果的影響。(2)綜合考慮各個參數,通過對15組仿真結果分析得出較為優化的輸送參數。(3)通過試驗對旋轉供料器的輸送情況進行研究。主要研究轉子轉速對填充系數、質量流速的影響。本文通過仿真模擬和試驗兩種方式對旋轉供料器進行研究,對轉子轉速、填充系數、質量流速等參數進行了分析,并給出較為優化的輸送參數,對實際生產應用有著重要的意義,為旋轉供料器參數的設置提供參考。
[Abstract]:As a continuous conveying equipment of powder pellets, rotary feeder is widely used in the processing of non-staple food products, chemical industry production, metal smelting and wine brewing because of its characteristics of easy control, strong reliability and stable transportation. Wharf transportation and other industries, in the bulk material transport industry has an important position. However, the research on rotary feeder is still at a low level in our country because of its late start and weak theoretical basis. Different process parameters and structure parameters of rotary feeder will affect the conveying effect. The main technological parameters that affect the conveying effect are rotor speed material filling coefficient and conveying pressure etc. In this paper, the method of simulation and experiment is used to study the rotary feeder with rotor diameter No. 62, and the influence of rotor speed and material filling coefficient on the conveying effect is analyzed. The main research contents are as follows: (1) establish 3D model and import EDEM simulation software, set transportation parameters, analyze discrete element particles, set up 3 filling coefficient 5 rotors speed in the simulation process, By studying the effects of rotor speed and filling coefficient on the output, mass flow rate, conveying power and energy consumption, the effects of rotor speed and filling coefficient on the conveying effect of rotary feeder are obtained. (2) the parameters are considered synthetically. Through the analysis of 15 groups of simulation results, the more optimized transportation parameters are obtained. (3) the conveying condition of rotary feeder is studied through experiments. The effect of rotor speed on filling coefficient and mass velocity is studied. In this paper, the rotary feeder is studied by simulation, simulation and experiment. The rotor speed, filling coefficient, mass velocity and other parameters are analyzed, and the optimized conveying parameters are given. It is of great significance for practical application and provides a reference for setting the parameters of rotary feeder.
【學位授予單位】：青島科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TH237

【參考文獻】

相關期刊論文 前10條

1 文桂林;何智翔;卿啟湘;鄒偉生;;糧庫氣力輸送機供料器設計與優化[J];計算機仿真;2016年02期

2 滕厚鵬;李華;馬平;;旋轉密封閥結構的創新改進[J];燃料與化工;2015年04期

3 鄒劍平;蘇煥歐;曾慶豐;;定量螺旋輸送器分析與改進[J];機電信息;2013年12期

4 冶旭華;;旋轉閥密封系統改進[J];通用機械;2012年10期

5 李奕;;葉輪式供料及噴射式供料系統研究[J];中國機械工程;2012年14期

6 ;基于離散元技術的EDEM軟件詳解[J];CAD/CAM與制造業信息化;2012年05期

7 成仲利;;新型氣力供料器的研究[J];農業裝備與車輛工程;2012年02期

8 孫潔;尹忠俊;陳兵;;開式螺旋輸送原理分析與參數設計[J];起重運輸機械;2010年05期

9 向冬枝;徐余偉;;螺旋輸送機設計參數的選擇和確定[J];水泥技術;2010年01期

10 王加信;旋轉葉輪供料器新產品[J];面粉通訊;2005年05期

相關博士學位論文 前1條

1 徐春暉;存在填隙流體顆粒離散元法理論研究[D];中國農業大學;2003年

相關碩士學位論文 前4條

1 蔡鵬;基于離散元的雙齒輥破碎機破碎性能分析與齒形優化[D];湖南大學;2014年

2 蘇娟;離散元方法在沙波紋研究中的應用[D];太原理工大學;2012年

3 吳帥芝;橡膠行業粉料自動稱量系統設計及實驗研究[D];青島科技大學;2010年

4 張東海;螺旋輸送機的優化研究[D];大連理工大學;2006年

，

本文編號：2250341