廣義形態學閉開差值運算在滾動軸承弱故障診斷中的應用
發布時間：2018-08-23 14:22
【摘要】：采用局部極值步長法和峭度準則,實現了形態學運算結構元素的自適應選擇。改良了基于廣義形態學閉開差值運算的相關算法,改善了獲取軸承弱故障特征的效果。仿真信號及實測故障振動信號的分析表明,所提出診斷方法的診斷效果優于傳統的廣義形態學分析方法,該診斷方法能夠較準確地提取滾動軸承微弱故障特征。
[Abstract]:The local extremum step size method and kurtosis criterion are used to realize the adaptive selection of structural elements in morphological operations. The algorithm based on the closed difference operation of generalized morphology is improved, and the effect of obtaining the weak fault feature of bearing is improved. The analysis of the simulated signal and the measured fault vibration signal shows that the diagnostic effect of the proposed method is better than that of the traditional generalized morphological analysis method, which can accurately extract the weak fault characteristics of rolling bearing.
【作者單位】： 西安理工大學機械與精密儀器工程學院;
【基金】：陜西省教育廳重點實驗室科學研究計劃資助項目(16JS076)
【分類號】：TH133.33
本文編號：2199336
[Abstract]:The local extremum step size method and kurtosis criterion are used to realize the adaptive selection of structural elements in morphological operations. The algorithm based on the closed difference operation of generalized morphology is improved, and the effect of obtaining the weak fault feature of bearing is improved. The analysis of the simulated signal and the measured fault vibration signal shows that the diagnostic effect of the proposed method is better than that of the traditional generalized morphological analysis method, which can accurately extract the weak fault characteristics of rolling bearing.
【作者單位】： 西安理工大學機械與精密儀器工程學院;
【基金】：陜西省教育廳重點實驗室科學研究計劃資助項目(16JS076)
【分類號】：TH133.33
【相似文獻】
相關博士學位論文 前1條
1 李永波;滾動軸承故障特征提取與早期診斷方法研究[D];哈爾濱工業大學;2017年
相關碩士學位論文 前2條
1 馬艷麗;基于全矢MEMD的滾動軸承狀態退化研究[D];鄭州大學;2017年
2 金兵;基于信息融合與VPMCD的滾動軸承智能診斷研究[D];鄭州大學;2017年
，本文編號：2199336
本文鏈接：http://sikaile.net/jixiegongchenglunwen/2199336.html
最近更新
教材專著
