發布時間：2018-08-22 17:17

【摘要】：利用光干涉技術研究了微油滴通過彈流潤滑接觸區的潤滑行為,考察了油滴大小、卷吸速度和載荷等因素的影響.結果表明微油滴在入口區域因擠壓或毛細力效應發生表面積擴展,從而影響潤滑膜的形成.油滴越大,擠壓擴展直徑越大,形成的膜厚越大.卷吸速度越高,入口處微油滴表面積擴展越不充分,僅接觸區局部形成油膜,微油滴在接觸表面擠壓出凹坑穿過接觸區.
[Abstract]:The lubrication behavior of micro-oil droplets passing through the contact zone of elastohydrodynamic lubrication (EHL) was studied by means of optical interferometry. The effects of oil droplet size, entrainment velocity and load on the lubrication behavior were investigated. The thicker the film is, the higher the entrainment velocity is, the more insufficient the expansion of the surface area of the micro-oil droplets at the entrance is. Only the oil film is formed locally in the contact area, and the micro-oil droplets are squeezed out of the contact surface and pass through the contact area.
【作者單位】： 青島理工大學機械工程學院;
【基金】：教育部高等學校博士學科點專項科研基金(20133721110002,20133721120003)資助~~
【分類號】：TH117.2

【相似文獻】

相關期刊論文 前1條

1 D.柯曼克;高振榕;;油水分離及分離器性能試驗規程[J];國外艦船技術(特輔機電設備類);1981年06期

，

本文編號：2197784