本文選題：半開式葉輪 + UG軟件　； 參考：《現代制造工程》2017年09期

【摘要】：半開式葉輪屬于復雜曲面零件,在離心泵中被廣泛應用。對某一半開式葉輪進行了結構參數計算和葉輪繪型,然后采用UG軟件對其進行了三維精確建模,并分析了該葉輪的數控加工工藝,進而在UG軟件里對該葉輪進行了數控加工刀具路徑的編制和切削仿真,最后將生成的數控程序傳入加工中心進行了實際加工。該方法加工出的半開式葉輪尺寸精確、表面質量好。
[Abstract]:Semi-open impeller is a complicated curved part, which is widely used in centrifugal pump. The structural parameters of a half open impeller are calculated and the shape of impeller is plotted. Then the 3D accurate modeling is carried out by UG software, and the NC machining technology of the impeller is analyzed. Furthermore, the NC machining tool path and cutting simulation of the impeller are carried out in UG software. Finally, the generated NC program is introduced into the machining center for actual machining. The semi-open impeller manufactured by this method is accurate in size and good in surface quality.
【作者單位】： 江蘇農林職業技術學院;
【分類號】：TG659;TH311

【相似文獻】

相關期刊論文 前1條

1 梁桂全;;前半開式葉輪五軸加工[J];金屬加工(冷加工);2014年03期

，

本文編號：1988704