本文選題：弧齒線圓柱齒輪 + 三維建模�。� 參考：《機械設計與制造》2017年11期

【摘要】：以弧齒線圓柱齒輪為研究對象,在分析弧齒線圓柱齒輪加工工藝的基礎上,利用UG/Open grip語言進行二次開發,實現了面向制造的弧齒線圓柱齒輪的參數化建模。借助ADAMS軟件對不同齒線半徑的弧齒線圓柱齒輪齒輪副進行動力學分析,揭示了齒線半徑對弧齒線圓柱齒輪嚙合力的影響規律,得到了弧齒線圓柱齒輪齒輪副平均嚙合力隨齒線半徑的變化規律曲線。當齒線半徑滿足條件1.7b≤R≤2.3b時,弧齒線圓柱齒輪的平均嚙合力達到最優。研究結果為弧齒線圓柱齒輪將來的設計及工程應用提供了理論依據。
[Abstract]:Taking the arc tooth line cylindrical gear as the research object, based on the analysis of the machining technology of the arc tooth line cylindrical gear, the parametric modeling of the arc tooth line cylindrical gear is realized by using UG/Open grip language. With the help of ADAMS software, the dynamic analysis of cylindrical gear pair with different tooth line radius is carried out, and the influence of tooth line radius on the engagement force of arc tooth line cylindrical gear is revealed. The curve of the mean meshing force with the radius of the tooth line is obtained. When the radius of tooth line satisfies the condition of 1.7b 鈮，

本文編號：1957278