本文選題：橋式起重機 + 網絡化協同設計��； 參考：《中北大學》2017年碩士論文

【摘要】：隨著起重機市場的日臻成熟,市場競爭越加激烈,傳統的起重機設計理念已不能適應現代企業的要求。根據天津起重設備有限公司內部的設計需求,并結合企業內部橋式起重機各部件系列化、標準化程度越來越高的特點,在對產品的協同設計、模塊化設計、快速報價等關鍵技術深入研究的基礎上,建立了橋式起重機設計與報價系統。最后以橋式起重機整機設計為例對系統的實用性、可靠性進行了驗證。首先,介紹了網絡化協同設計、模塊化設計、起重機設計技術以及快速報價技術的海內外研究現狀與發展趨勢,提出了構建橋式起重機設計與報價系統的總體思路。其次,詳細介紹了產品協同設計系統中所涉及的系統體系結構、集成框架,并且分別構建了基于混合網絡模式的協同設計體系結構以及基于DPDM的網絡化協同設計系統的框架模型。再次,對產品模塊化設計相關理論進行介紹,并搭建了產品模塊化設計的過程模型。以橋式起重機為例,對已有產品的模塊化平臺構建過程展開研究,例如市場需求現狀、零部件ABC分析、產品模塊化規劃、零部件編碼體系及名稱字典的建立等等,最后搭建了橋式起重機模塊化平臺框架。從次,深入研究了產品快速報價技術,分別介紹了產品報價價格的組成、產品報價價格的估算方法。以橋式起重機模塊化設計結果為前提,建立了產品快速報價系統框架,并將其作為設計與報價系統的一個子模塊。最后,結合產品模塊化設計和快速報價技術,以系統開發目標為導向,在現有開發工具的基礎上,開發了橋式起重機設計與報價系統。應用上述開發成果,以橋式起重機整機為實例,對系統的實用性、可靠性進行了驗證,取得了理想的效果。
[Abstract]:With the increasing maturity of crane market, the market competition is more and more fierce, the traditional crane design concept can not meet the requirements of modern enterprises. According to the internal design requirements of Tianjin lifting equipment Co., Ltd., combined with the series of components of bridge crane in the enterprise and the increasingly high standardization, the collaborative design and modular design of the products are carried out. The design and quotation system of bridge crane is established on the basis of deep research on key technologies such as quick quotation. Finally, the practicability and reliability of the system are verified by the design of bridge crane. Firstly, the present situation and development trend of network collaborative design, modular design, crane design technology and rapid quotation technology are introduced, and the general idea of constructing bridge crane design and quotation system is put forward. Secondly, the system architecture and integration framework of the product collaborative design system are introduced in detail. The architecture of collaborative design based on hybrid network pattern and the framework model of networked collaborative design system based on DPDM are constructed respectively. Thirdly, the related theories of product modular design are introduced, and the process model of product modular design is built. Taking the bridge crane as an example, the paper studies the process of building the modular platform of the existing products, such as the current situation of market demand, the ABC analysis of parts and components, the modular planning of products, the establishment of coding system of parts and dictionary of names, and so on. Finally, the modular platform frame of bridge crane is built. In this paper, the rapid quotation technology is studied, and the composition of product quotation price and the method of estimating product quotation price are introduced respectively. On the premise of the modular design result of bridge crane, the frame of product rapid quotation system is established and used as a sub-module of the design and quotation system. Finally, a bridge crane design and quotation system is developed on the basis of the existing development tools, combining the modular design of products and the rapid quotation technology, and taking the system development goal as the direction. Taking the bridge crane as an example, the practicability and reliability of the system are verified and the ideal results are obtained.
【學位授予單位】：中北大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TH215;TP311.52

【參考文獻】

相關期刊論文 前10條

1 王理;王宗彥;張兵;伍權;;基于云制造的起重機協同設計與制造模式[J];機械設計與研究;2014年04期

2 吳淑芳;虞國軍;王宗彥;秦慧斌;黃啟良;;面向網絡化的機械產品參數化協同設計研究[J];機械科學與技術;2012年06期

3 顧新建;祁國寧;馬軍;楊青海;;模塊化技術的應用現狀和趨勢[J];成組技術與生產現代化;2012年01期

4 行開新;田凌;;支持異地協同設計的異構CAD虛擬裝配系統[J];清華大學學報(自然科學版);2009年02期

5 丁力平;譚建榮;馮毅雄;李中凱;;基于解析結構模型的產品模塊構建及其優化[J];計算機集成制造系統;2008年06期

6 宋李俊;楊育;張曉冬;楊潔;;基于主觀偏好的協同設計伙伴評價選擇算法研究[J];計算機集成制造系統;2007年10期

7 王新,譚建榮,張樹有;大批量定制下產品報價快速響應技術研究[J];計算機輔助設計與圖形學學報;2005年08期

8 高飛,潘雙夏,馮培恩;基于廣義有向圖的產品功能建模方法研究[J];浙江大學學報(工學版);2005年05期

9 孫林夫;面向網絡化制造的協同設計技術[J];計算機集成制造系統;2005年01期

10 侯亮,唐任仲,徐燕申;產品模塊化設計理論、技術與應用研究進展[J];機械工程學報;2004年01期

，

本文編號：1916670