本文選題：標準件數據庫 + 特征建模　； 參考：《太原理工大學》2017年碩士論文

【摘要】：管路布局在液壓系統設計中占有重要地位,提高管路布局的自動化程度一直是研究熱點。隨著計算機技術的進步,管路的設計也從圖紙搬上了屏幕,并逐漸從二維設計發展到三維設計。目前流行的三維設計軟件所提供的管道命令粒度較小,與液壓管路布局過程所需命令不能直接匹配,使用時需要進行一些固定組合;液壓管路設計過程中所需的管接頭、管夾標準件數據庫還未得到完善,難以滿足實際需求;且布局時的一些實用參數需要設計師手動測量,管夾布置的推薦規則亦需設計師手動實現。該設計過程中存在許多程序性的重復勞動,使設計效率難以得較大提高,導致競爭優勢不足。通過分析國內外液壓管路布局計算機輔助設計系統的發展過程和現狀,并總結出其設計過程中存在的一些不足,使用特征建模與參數化設計相結合的理論,對三維設計軟件Pro/E進行了二次開發,以提高液壓管路設計的自動化程度。首先介紹了特征建模和參數化設計的基礎理論,并對二者的結合使用作了必要的闡述;然后對液壓用管接頭進行了分類與總結,查閱設計標準建立各種管接頭的三維模型用以完善其數據庫;通過研究液壓管路系統中常用的連接方式,分析其形狀特征,以實現設計時連接模型的快速生成;同時建立了液壓用管夾標準件數據庫,并將管夾配置的推薦標準集成到程序中,實現了管夾的自動配置;最后,分析管路系統各部分元件的特點,開發出“元件統計”的功能,方便后續實際的取件、加工和裝配過程。分析研究Pro/E所提供的二次開發方法,結合開發目的和所要實現的功能,確定出基于族表、UDF和Pro/Toolkit的開發方法。族表方法用于標準件數據庫的建立和完善;UDF方法用于由參數驅動的特征建模,實現常用連接方式的快速生成;Pro/Toolkit是一個工具包,內部包含的功能函數可實現參數提取、規則集成、菜單定制等一系列功能,其使用在整個開發過程中均有涉及。族表和UDF的設計在win7系統下的Pro/E5.0中進行,Pro/Toolkit中的功能函數作為Pro/E二次開發的無縫接口,需在VS2008平臺上編寫代碼并生成可運行的DLL應用程序。同時,根據程序特點定制出所需的輔助文件和人機界面,最終實現開發結果在Pro/E5.0平臺上的運行。所有開發內容共同組成了“液壓管路布局輔助系統”,將其應用到某液壓系統中來輔助管路布局,取得了良好效果。設計過程實現了部分設計命令與管路布局的直接匹配,提高了設計效率,并增強了競爭優勢。
[Abstract]:Pipeline layout plays an important role in hydraulic system design. With the development of computer technology, the design of pipeline has moved from drawing to screen, and gradually developed from two-dimensional design to three-dimensional design. The current popular 3D design software provides a relatively small particle size of pipeline commands, which can not be directly matched with the commands required in the process of hydraulic piping layout, and some fixed combinations are needed when using; the pipe connectors required in the process of hydraulic pipe design, The database of standard parts of pipe clamps is not perfect, it is difficult to meet the actual demand, and some practical parameters in layout need to be measured manually by designers, and the recommended rules of pipe clamps are also required to be realized manually by designers. In the design process, there are a lot of procedural repeated work, which makes it difficult to improve the design efficiency, leading to the lack of competitive advantage. Based on the analysis of the development process and present situation of CAD system for hydraulic pipeline layout at home and abroad, some shortcomings in the design process are summarized, and the theory of combining characteristic modeling with parametric design is used. In order to improve the automation degree of hydraulic pipe design, the three dimensional design software Pro/E is redeveloped. The basic theory of feature modeling and parameterized design is introduced, and the combination of them is expounded, then the hydraulic pipe joint is classified and summarized. According to the design standard, the 3D model of pipe joint is built to perfect its database, and the shape characteristic is analyzed by studying the common connection mode in hydraulic pipe system, so as to realize the rapid generation of connection model. At the same time, the database of standard parts of hydraulic pipe clamp is established, and the recommended standard of pipe clip configuration is integrated into the program to realize the automatic configuration of pipe clip. Finally, the characteristics of each part of the pipe system are analyzed, and the function of "component statistics" is developed. Easy to follow up the actual parts, processing and assembly process. The secondary development method provided by Pro/E is analyzed and studied. Combined with the purpose of development and the function to be realized, the development method based on family table UDFs and Pro/Toolkit is determined. The family table method is used to establish and perfect the standard part database and the UDF method is used to model the feature driven by parameters. The rapid generation of the common connection way is realized by Prop Toolkit. The functions contained inside can be used to extract parameters and integrate rules. Menu customization and a series of functions, its use in the entire development process are involved. The design of family table and UDF is carried out in Pro/E5.0 under win7 system. The function function in Pro-Toolkit is used as the seamless interface of Pro/E secondary development. It is necessary to write code on VS2008 platform and generate running DLL application program. At the same time, according to the characteristics of the program, the required auxiliary files and man-machine interface are customized, and finally the development results are implemented on the Pro/E5.0 platform. All the development contents constitute a "hydraulic pipeline layout auxiliary system", which is applied to a hydraulic system to assist the pipeline layout, and good results have been obtained. The design process realizes the direct matching between some design commands and pipeline layout, improves the design efficiency and enhances the competitive advantage.
【學位授予單位】：太原理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TH137

【參考文獻】

相關期刊論文 前10條

1 趙柏萱;劉檢華;寧汝新;龔晶;;一種基于工程規則的管路自動布局與綜合優化技術[J];機械工程學報;2015年21期

2 周培;劉嶺;陳仁越;皮贊;;Pro/E二次開發關鍵技術及其在管路快速設計中的應用[J];導彈與航天運載技術;2015年03期

3 辛運勝;王亞新;姚平喜;;Pro/E二次開發在液壓集成塊設計中的應用[J];組合機床與自動化加工技術;2014年06期

4 侯敬波;焦建龍;劉志勇;;淺談工程機械液壓管路布置[J];叉車技術;2013年04期

5 翟華;王永成;程東東;趙彩瑕;;基于三維設計的軋鋼機液壓配管設計[J];液壓氣動與密封;2013年11期

6 呼永紅;;開目CAD中石油專用螺紋子圖的入庫方法研究[J];機械工程師;2013年10期

7 李鵬程;孫文磊;何麗;王宏偉;;Pro/E二次開發在網絡零件庫系統中的應用研究[J];機械設計與制造;2012年11期

8 李光;劉光發;李楊;;基于本體的液壓元件知識建模研究[J];液壓與氣動;2012年08期

9 劉玉秦;宋彥;;基于Pro/TOOLKIT的Pro/E二次開發技術研究[J];制造業自動化;2011年20期

10 劉明校;肖云龍;宗穎超;鐘光明;陳偉;高德鎖;;Pro/ENGINEER管道特征在空調管路設計中的應用及彎管尺寸標注方法[J];機械設計與制造;2011年03期

相關碩士學位論文 前2條

1 張勛;基于UG的軸類零件特征建模方法研究[D];蘭州理工大學;2006年

2 張永利;液壓集成塊智能優化設計系統——模型數據庫與系統集成[D];大連理工大學;2004年

，

本文編號：1794862