本文選題：SK螺桿轉子磨床 + 大型螺桿轉子�。� 參考：《機床與液壓》2017年16期

【摘要】：在成形磨削幾何原理基礎上,基于SK7032螺桿轉子磨床提出大型螺桿轉子分段磨削技術。根據齒輪嚙合原理,分析砂輪刀具在分段磨削螺桿轉子時的空間包絡運動形式,建立轉子分段磨削刀位軌跡計算模型。在螺旋面加工中對轉子分段磨削中產生的干涉進行分析,并制定干涉消除的具體方案,達到刀位軌跡優化。針對大型螺桿轉子分段磨削的功能要求開發了"螺桿轉子分段磨削計算軟件",參數化輸入并得出轉子分段磨削數控加工程序;根據生成的加工程序,在SK7032螺桿轉子磨床上進行分段磨削試驗,驗證了大型螺桿轉子分段磨削的可行性,為螺桿轉子的數控加工提供一種新的方法。
[Abstract]:Based on the geometric principle of forming grinding, a large screw rotor segmented grinding technology is proposed based on SK7032 screw rotor grinder.According to the gear meshing principle, the spatial envelope motion of grinding wheel tool in grinding screw rotor is analyzed, and the calculation model of cutter path of rotor section grinding is established.In helical surface machining, the interference generated in rotor grinding is analyzed, and the specific scheme of interference elimination is worked out to optimize the tool path.According to the functional requirements of segmental grinding of large screw rotors, a "calculation software for segmental grinding of screw rotors" was developed, which was parameterized and the NC machining program for rotor segmental grinding was obtained.The experiment of segmental grinding on SK7032 screw rotor grinder verifies the feasibility of segmental grinding of large screw rotor and provides a new method for NC machining of screw rotor.
【作者單位】： 陜西理工大學機械工程學院;洛陽金鷺硬質合金工具有限公司;
【基金】：陜西省2011協同創新中心(QBXT-Z(Y)-15-1) 陜西理工大學2017年度校級科研項目(SLGKY2017-23)
【分類號】：TG580.6;TH45

【相似文獻】

相關期刊論文 前1條

1 周斌;余建旬;楊震;田廣利;;SK7032螺桿轉子磨床的設計研究[J];制造技術與機床;2013年05期

，

本文編號：1749527