本文選題：四行星齒輪泵　切入點：流量脈動　出處：《遼寧工程技術大學學報(自然科學版)》2017年07期

【摘要】：依據前期研究的四行星齒輪泵的流量脈動特性為基礎,建立了相應的壓力脈動數學模型.對齒輪泵的壓力脈動進行了理論和仿真研究,求得了相同理論流量和轉速及工作壓力下的傳統齒輪泵和四行星齒輪泵的壓力脈動載荷.根據所求得的壓力脈動載荷,采用Workbench軟件對齒輪泵軸進行了瞬態和疲勞壽命分析.通過對比分析證明四行星齒輪泵的壓力脈動減小10倍以上,齒輪軸的疲勞壽命提高280.7%~325%.
[Abstract]:Based on the flow pulsation characteristics of the four-planet gear pump, a corresponding mathematical model of pressure pulsation is established. The theoretical and simulation study on pressure fluctuation of gear pump is carried out. The pressure pulsation loads of traditional gear pumps and four-planet gear pumps with the same theoretical flow rate, rotational speed and working pressure are obtained. The transient and fatigue life of gear pump shaft is analyzed by Workbench software. It is proved that the pressure pulsation of four planet gear pump is reduced by more than 10 times, and the fatigue life of gear shaft is increased by 280.7 and 325 times.
【作者單位】： 遼寧工程技術大學機械工程學院;
【基金】：遼寧省教育廳重點實驗室基金(2009S052) 遼寧省科技廳工業公關基金(2008220049)
【分類號】：TH325

【相似文獻】

相關期刊論文 前10條

1 黃建華;巧修齒輪泵[J];礦山機械;2001年04期

2 代彥斌,陳克榮,舒麗;擠出塑料的齒輪泵設計[J];機械管理開發;2001年S1期

3 祝海林,鄒e，

本文編號：1677479