本文選題：低溫絕熱氣瓶　切入點：智能化檢驗系統　出處：《大連海事大學》2017年碩士論文

【摘要】：低溫絕熱氣瓶作為一種儲運低溫液體的特種容器,因其充裝率高、使用方便、使用成本低等特點,逐漸地取代了傳統高壓鋼制氣瓶,被廣泛的應用在工業生產、醫療和冶金等多個行業。近年來,由于其使用量逐漸增多,為確保低溫絕熱氣瓶在使用過程中的安全性和可靠性,因此需要進行定期檢驗。本文根據低溫絕熱氣瓶產生問題及失效模式的主要原因,結合傳統手工檢驗的工藝流程和氣瓶檢驗的國家標準,采用檢驗過程自動化和檢驗信息網絡化的方法,設計了一套低溫絕熱氣瓶智能化檢驗流程及其檢驗系統,主要的研究?jī)?nèi)容有:(1)以江蘇省低溫絕熱設備產品質量監督檢驗中心的低溫絕熱氣瓶檢驗項目為研究背景,對低溫絕熱氣瓶智能化檢驗系統進行了詳細的需求分析,給出了低溫絕熱氣瓶智能化檢驗系統的具體檢驗工藝與檢驗流程,對低溫絕熱氣瓶的智能化檢驗方案進行了設計。(2)針對低溫絕熱氣瓶智能化檢驗系統的檢驗流程,重點研究了氣密性試驗、真空度檢測、靜態蒸發率測試三個關鍵工藝,采用組態王、SQL Server數據庫等軟件設計并實現了氣密性試驗子系統、真空度檢測子系統和靜態蒸發率測試子系統,實現了氣密性、真空度和靜態蒸發率的智能化檢驗和信息管理。(3)針對低溫絕熱氣瓶智能化檢驗系統中的靜態蒸發率檢測時間較長的問題,為了縮短靜態蒸發率測試的時間、提高檢驗效率,分別采用一元線性回歸和GM(1,1)模型進行建模,對靜態蒸發率快速檢驗方法進行了探索,通過實測數據分析,驗證了此方法的可行性。
[Abstract]:As a special container for storing and transporting low temperature liquid, low temperature adiabatic gas cylinder has been widely used in industrial production because of its high filling rate, convenient use, low cost and so on. In recent years, because of its increasing use, in order to ensure the safety and reliability of cryogenic adiabatic cylinders, So it is necessary to carry out periodic inspection. According to the problems caused by low temperature adiabatic gas cylinders and the main causes of failure modes, combined with the traditional manual inspection process and the national standard of gas cylinder inspection, By using the method of automation of inspection process and networking of inspection information, a set of intelligent inspection process and inspection system for low temperature adiabatic gas cylinder are designed. The main research contents are as follows: (1) based on the research background of the low temperature adiabatic cylinder inspection project of Jiangsu Province low temperature adiabatic equipment product quality supervision and inspection center, the detailed demand analysis of the low temperature adiabatic cylinder intelligent inspection system is carried out. The concrete inspection technology and inspection flow of the intelligent inspection system for the low temperature adiabatic cylinder are given. The intelligent inspection scheme of the low temperature adiabatic cylinder is designed. (2) the inspection flow of the intelligent inspection system for the low temperature adiabatic cylinder is designed. In this paper, three key technologies of air tightness test, vacuum test and static evaporation rate testing are studied emphatically. The subsystem of air tightness test is designed and implemented by using Kingview SQL Server database and other software. The vacuum measurement subsystem and the static evaporation rate test subsystem have realized the airtightness. To solve the problem of long detection time of static evaporation rate in the intelligent inspection system of low temperature adiabatic gas cylinder, in order to shorten the test time of static evaporation rate and improve the inspection efficiency, The linear regression model and GM-1) model are used to model the fast test method of static evaporation rate. The feasibility of this method is verified by the analysis of measured data.
【學位授予單位】：大連海事大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TH49

【參考文獻】

相關期刊論文 前10條

1 丁棟;陳聯;孫冬花;朱建炳;;車載LNG氣瓶絕熱性能定期檢測方法分析[J];真空與低溫;2016年03期

2 駱輝;薄柯;李桐;黃強華;;車用LNG氣瓶定期檢驗技術探討[J];中國特種設備安全;2016年04期

3 劉金良;楊樹斌;李蔚;勞英杰;夏莉;;車用LNG氣瓶的定期檢驗現狀與思考[J];中國特種設備安全;2016年01期

4 丁昌;付延唐;吳學紅;龔毅;;低溫貯運設備的關鍵技術及發展趨勢展望[J];低溫與超導;2015年12期

5 徐穎強;許t，

本文編號：1661774