本文選題：雙楔角環墊　切入點：法蘭結構參數　出處：《過程工程學報》2017年03期

【摘要】：采用數值模擬方法研究了法蘭結構參數對雙楔角環墊密封接觸壓力及有效密封寬度的影響,并通過正交實驗法對法蘭結構參數進行了顯著性分析.結果表明,隨法蘭各結構尺寸減小,雙楔角環墊主、從密封面最大接觸壓力不同程度增大.法蘭結構參數對新型雙楔角環墊密封性能影響的顯著性順序為主法蘭小端外徑法蘭外徑錐頸大端厚度錐頸高度法蘭有效厚度.主法蘭小端外徑對雙楔角環墊主、從密封面最大接觸壓力影響最大.
[Abstract]:The influence of flange structure parameters on contact pressure and effective seal width of double wedge ring gasket is studied by numerical simulation method. The significance of flange structural parameters is analyzed by orthogonal experiment. With the flange structure size decreasing, double wedge angle ring pad main, The effect of flange structure parameters on the sealing performance of the new type of double wedge ring gasket is mainly in the order of effectiveness of flange flange with small end outer diameter flange outer diameter flange big end thickness cone neck height flange effective thickness of flange structure parameters influence on sealing performance of new type double wedge ring gasket with different degrees of maximum contact pressure. Main flange small end outer diameter double wedge angle ring pad main, The maximum contact pressure from the sealing surface has the greatest effect.
【作者單位】： 南京工業大學機械與動力工程學院;
【基金】：國家自然科學基金青年科學基金資助項目(編號:11402132) 江蘇省自然科學基金資助項目(編號:BK20131411) 江蘇省高校自然科學基金資助項目(編號:16KJB130003)
【分類號】：TH136
，

本文編號：1660420