本文關鍵詞：基于區域分級的陶瓷閥芯表面缺陷檢測系統研究與實現　出處：《組合機床與自動化加工技術》2017年10期 　論文類型：期刊論文

  更多相關文章： 陶瓷閥芯 掩模板 blob檢測 裂紋檢測

【摘要】：針對陶瓷閥芯表面缺陷特征復雜、嚙合表面存在研磨拋光區域等問題,現有基于視覺檢測的陶瓷閥芯表面缺陷檢測算法對不同種類陶瓷閥芯的適應性較差且漏檢率高,該研究提出了一種分區域、多級優化的陶瓷閥芯表面缺陷檢測算法。首先依據陶瓷閥芯表面反射率的不同,將其劃分為兩個檢測區域:拋光面(P)、非拋光面(Non P),然后根據陶瓷閥芯表面缺陷特征,將其分為兩類缺陷:G缺陷、C缺陷。在檢測過程中,搜索模板圖像金字塔信息,調整目標灰度圖像位姿,經掩模板(Mask)配準,提取出P區域、Non P區域,通過blob檢測、裂紋檢測,分別對P區域、Non P區域進行缺陷提取。通過實驗研究與系統設計,分析了檢測算法的可行性、適用性,結果表明該研究算法針對不同種類陶瓷閥芯表面缺陷檢測漏檢率低,且能通過優先級的合理設置,提高檢測效率。
[Abstract]:Aiming at the complex surface defects of ceramic spool and the problem of grinding and polishing area on meshing surface, etc. The existing ceramic spool surface defect detection algorithm based on visual detection has poor adaptability and high leakage rate to different kinds of ceramic spool. Multi-level optimization of ceramic spool surface defect detection algorithm. Firstly, according to the different surface reflectivity of ceramic spool, it is divided into two detection areas: polished surface Pao, non-polished surface Non P). Then according to the characteristics of ceramic spool surface defects, it is divided into two types of defects: G defect and C defect. In the detection process, the template image pyramid information is searched, and the target gray image pose is adjusted. The P region was extracted by mask Mask registration, and the P region was detected by blob, crack detection, respectively. Non P region for defect extraction. Through experimental research and system design, the feasibility and applicability of the detection algorithm are analyzed. The results show that the detection rate of different ceramic spool surface defects is low, and the detection efficiency can be improved by setting the priority reasonably.
【作者單位】： 湖北工業大學機械工程學院;
【基金】：湖北省教育廳重點項目:面向芯片貼裝的顯微視覺在線檢測技術研究(D 20151406) 湖北省自然科學基金項目:多目視覺引導機器人絕對定位技術的研究(2016CFB513)
【分類號】：TH136;TP391.41
【正文快照】： 0引言陶瓷閥芯是由動片與靜片組成的一種動密封組件,其因耐磨、耐高溫、耐腐蝕、環保健康,廣泛運用在各類水龍頭中,通過控制進、出水孔間的偏移量調節水流大小。目前,隨著國家強制性標準《陶瓷片密封水嘴》的實施,我國陶瓷閥芯需求量逐年增加,不同規模的生產企業也逐年增長。

【相似文獻】

相關碩士學位論文 前2條

1 李積才;鋼球表面缺陷檢測裝置的設計及仿真[D];哈爾濱理工大學;2016年

2 呂景超;鋼球表面展開機構建模與仿真研究[D];濟南大學;2013年

，

本文編號：1406446