本文關鍵詞：基于粒子群算法的大模數齒輪冷擠壓變過盈量組合凹模優化設計　出處：《鍛壓技術》2017年08期 　論文類型：期刊論文

  更多相關文章： 大模數圓柱直齒輪 冷擠壓 組合凹模 變過盈量 粒子群算法

【摘要】：針對大模數圓柱直齒輪冷擠壓過程中均勻過盈量組合凹模易出現開裂的問題,提出一種變過盈量組合凹模的設計方法,并以直徑比、中圈內壁錐角和過盈系數為設計變量,以降低模芯內壁等效應力、避免模芯出現周向拉應力和避免內外圈塑性變形為優化目標,建立變過盈量組合凹模結構參數與綜合加權評分值的Kriging模型。應用Kriging模型結合粒子群算法,在可行變量空間內尋優,得到最優工藝參數組合為:n_2=1.55,n_3=2.55,γ'=1.25°,β_2=2.5‰,β_3=2.4‰。研究結果表明,采用優化后的變過盈量組合凹�？捎行П苊饨M合凹模的破裂,提高模具的使用壽命。
[Abstract]:In order to solve the problem that the uniform interference volume combined die is prone to crack during cold extrusion of large modulus cylindrical spur gear, a design method of variable interference volume combined die is proposed, and the diameter ratio is used. The cone angle and interference coefficient of the inner wall of the middle ring are the design variables to reduce the equivalent stress of the inner wall of the die core, to avoid the circumferential tensile stress and to avoid the plastic deformation of the inner ring. The Kriging model of variable interference volume combined die structure parameter and comprehensive weighted scoring value is established, and the Kriging model combined with particle swarm optimization algorithm is applied to search for optimization in feasible variable space. The optimum technological parameters are as follows: 1 / NSP _ 21.55 / T _ T _ 32.55, 緯 _ T _ (1.25) 擄, 尾 _ 2S _ 2 / T _ (2.5 鈥，

本文編號：1405783