本文關鍵詞：液壓雙液注漿泵的優化設計與仿真分析　出處：《河北工程大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 雙液注漿泵 第一注漿缸 第二注漿缸 調漿裝置 優化設計 AMESim仿真

【摘要】：隨著經濟社會的發展,橋梁、公路、鐵路、隧洞以及礦井的建設越來越多,不同的建筑物在建設或維修時往往需要注漿,而將漿液送到指定位置的正是注漿設備。本文就要對注漿設備中的一種雙液注漿泵進行研究。液動力注漿泵是注漿泵發展的一個主要方向。而材料業的發展使得注漿材料的品種出現多樣化,這樣注漿材料在選擇上就會出現多樣化,兩種漿液在配制比例上就會出現多樣化,這就要求雙液注漿泵能夠輸送不同比例的漿液。本論文正是以液動力注漿泵為基礎,注漿的雙液比例在一定范圍內能夠?qū)崿F(xiàn)無級調節為前提條件,對液壓泵工作原理分析后進行設計的。研究的主要內容包括如下:(1)對注漿泵的工作原理進行分析,確定注漿泵的液壓系統的結構組成,并對起關鍵作用的部件進行設計,使整個注漿泵在實際注漿時漿液的比例能夠?qū)崿F(xiàn)無級調節。(2)在遵守機械設計手冊的基礎上,應用簡單易懂的線性規劃的優化設計方法對缸類零件和調漿裝置進行了具體的尺寸確定,使設計的雙液注漿泵在尺寸和外觀上滿足要求。(3)對油泵和注漿缸應用了一種新的數學建模方法(電液相似原理的方法)進行數學建模,使得復雜的液壓回路變?yōu)楹?jiǎn)單的電路回路,方便了問題的解決。(4)在液壓仿真軟件AMESim中對注漿缸和調漿裝置進行建模,并設置參數,進行動態仿真,繪制出排漿量和排漿壓力的曲線圖,所得曲線結果與預期相符,說明設計的雙液注漿泵合理,并能滿足要求。
[Abstract]:With the development of social economy, bridge, highway, railway, tunnel and underground construction more and more, different buildings often require grouting in construction or maintenance, and the slurry is sent to the designated position is the grouting equipment. This paper will be a double liquid injection pump of grouting equipment. Hydrodynamic grouting the pump is one of the main direction of development of the grouting pump. But the development of material industry so that the grouting material varieties appear diversification, so the grouting material will appear in the choice of diversification, two kinds of slurry in proportion will appear diversification, which requires the double liquid grouting pump can transport different proportions of slurry. This thesis is based on hydrodynamic injection pump based on double liquid grouting ratio can realize the stepless regulation of the premise conditions in a certain range, the analysis of the working principle of hydraulic pump design. The main research contents Include the following: (1) the working principle of grouting pump through the analysis of the structure of the hydraulic system of injection pump design, and plays a key role in the whole parts of slurry grouting pump in actual grouting ratio when can realize the stepless regulation. (2) in accordance with the mechanical design manual on the optimization the design method of the application of linear programming is simple and easy to understand the specific size of cylinder parts and mixing device, the double liquid grouting pump is designed to meet the requirements in size and appearance. (3) a new mathematical modeling method is applied to grouting pump and cylinder (hydraulic similarity principle method) mathematical modeling, the hydraulic circuit and the complex circuit is simple, easy to solve the problem. (4) modeling of the grouting cylinder and pulping device in the hydraulic simulation software AMESim, and set the parameters for dynamic simulation, draw The curves of the pulping volume and the pulping pressure are consistent with the expected results, indicating that the designed double liquid grouting pump is reasonable and can meet the requirements.

【學位授予單位】：河北工程大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TH137;TH38

【參考文獻】

相關期刊論文 前9條

1 行登愷,史同浩;容積式轉子稠油泵的特性及應用[J];管道技術與設備;1997年01期

2 ;Optimization design study of low-Reynolds-number high-lift airfoils for the high-efficiency propeller of low-dynamic vehicles in stratosphere[J];Science China(Technological Sciences);2010年10期

3 寇偉光;周惠群;楊靜;;液壓系統建模方法研究[J];機械與電子;2010年05期

4 李麗;;溢流閥的特性及應用[J];科技信息;2010年11期

5 彭國君,劉振明,王瑞;液壓缸密封裝置的分析與研究[J];煤礦機械;2001年01期

6 張玉蓮,翁慧燕;液壓密封裝置的探索[J];浙江海洋學院學報(自然科學版);2001年04期

7 王杰,杜嘉鴻,陳守庸;注漿技術的發展與展望[J];沈陽建筑工程學院學報;1997年01期

8 陳惠卿;;液壓油的分類與產品標準[J];液壓氣動與密封;2007年05期

9 郭恭;張濤;;煤礦用雙液注漿泵受壓端面密封結構改進[J];中州煤炭;2013年11期

相關碩士學位論文 前1條

1 劉海麗;基于AMESim的液壓系統建模與仿真技術研究[D];西北工業大學;2006年

，

本文編號：1363203