本文選題：氣泡穩定性　切入點：纖維素醚　出處：《建筑材料學報》2017年04期 　論文類型：期刊論文

【摘要】：采用羥丙基甲基纖維素醚(HPMC)溶液來模擬蒸壓加氣混凝土料漿,并測試了HPMC溶液黏度,研究了溶液黏度和NaOH質量分?jǐn)?shù)對鋁粉氣泡穩定性的影響.結果表明:HPMC溶液黏度與HPMC質量分?jǐn)?shù)呈冪函數關系;溶液黏度增加,有利于鋁粉氣泡的生成和穩定,直到達到溶液黏度臨界值;增加NaOH質量分?jǐn)?shù)將提高鋁粉發氣速度,但過高的NaOH質量分?jǐn)?shù)會加速氣泡的合并和破裂,因此NaOH質量分?jǐn)?shù)存在一個最佳值.
[Abstract]:The hydroxypropyl methyl cellulose ether (HPMC) solution to simulate the autoclaved aerated concrete slurry, and tested the HPMC viscosity of the solution and the effect of solution viscosity and NaOH mass fraction of aluminum bubble stability. The results show that the viscosity of HPMC solution with the mass fraction of HPMC is a power function; the viscosity of the solution increased, with the formation and stabilization for aluminum bubble, the viscosity of the solution until it reaches the critical value; increasing the mass fraction of NaOH will improve the speed of powder gas, but the mass fraction of NaOH is too high will accelerate consolidation and rupture of bubbles, the mass fraction of NaOH has a best value.

【作者單位】： 同濟大學先進土木工程材料教育部重點實驗室;
【基金】：“十三五”國家重點研發計劃項目(2016YFC0700802)
【分類號】：TU528
，

本文編號：1640269