本文關鍵詞： 智能家居 STM32 ZigBee GPRS　出處：《中原工學院》2017年碩士論文　論文類型：學位論文

【摘要】：智能家居是以后家居的發展主體,給廣大居民的居住環境提供了便利。它是指將家里的電子產品、家用設備通過無線網絡連接,建立由屋里環境檢測、處理、工作、家居自動化的管理系統。然而,現在的家居控制系統整體仍處在一個初期的階段,產品比較昂貴,標準不統一,產品的形式與人們的需求之間存在著差異和不匹配等因素,基于此環境背景,本文設計了一種基于STM32的無線網絡智能家居控制系統。本文詳細介紹了智能家居系統的總體設計方案、具體軟、硬件開發及無線傳輸網絡ZigBee、GPRS,并且實現了對家中一些電器的控制。根據本系統設計的的要求,本文的智能家居控制系統選擇了基于STM32的硬件平臺,同時,采用嵌入式的系統,因為嵌入式系統的研究思路是首先設計電路,在設計過程中使用Altium Designer軟件完成硬件電路的搭建,然后用Keil uVision5軟件對該系統進行編程、調試,用串口調試助手進行仿真和調試,最后對仿真結果進行測試與分析,基本上滿足了該系統的要求。本系統包括LED燈光控制、對窗簾電機的控制、無線極位置停止、煙霧的感知與檢測,無線局域網絡ZigBee建立連接、無線網絡GPRS的連接與接收、觸摸屏控制器研究與設計、手機客戶端系統的模擬研究。系統通過本地連接控制方式,借助一個觸摸屏的控制器,通過在觸摸屏各個位置中間設置不同模塊的點擊觸發信號,以實現各傳感器模塊的相應功能;同時也可以采用遠程控制的方式,通過模擬手機客戶端發送指令,經過GPRS網絡的傳送,模擬實現各模塊所代表的功能。
[Abstract]:Smart home is the main body of the development of the future home, providing convenience for the living environment of the majority of residents. It refers to the home electronic products, household equipment through wireless network connection, set up by the indoor environment detection, processing. Work, home automation management system. However, the current home control system as a whole is still in an early stage, the product is more expensive, standards are not uniform. There are differences and mismatches between the form of products and people's needs, and so on, based on this environmental background. This paper designs a wireless network intelligent home control system based on STM32. Hardware development and wireless transmission network ZigBeeGPRSs, and the realization of home control of some electrical appliances, according to the requirements of the system design. The intelligent home control system of this paper chooses the hardware platform based on STM32 and adopts the embedded system because the research idea of the embedded system is to design the circuit first. In the process of design, Altium Designer software is used to build the hardware circuit, and then Keil uVision5 software is used to program and debug the system. The serial port debugging assistant is used to simulate and debug. Finally, the simulation results are tested and analyzed, which basically meet the requirements of the system. The system includes LED lighting control, curtain motor control. Wireless pole stop, smoke sensing and detection, wireless local area network ZigBee connection, wireless network GPRS connection and reception, touch screen controller research and design. The simulation of mobile phone client system. The system through the local connection control mode, with the help of a touch screen controller, by setting different modules in the touch screen in the middle of the click trigger signal. In order to realize the corresponding functions of each sensor module; At the same time, remote control can be used to simulate the mobile phone client to send instructions, through the transmission of GPRS network, to simulate the realization of the functions represented by each module.
【學位授予單位】：中原工學院
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TU855;TP273

【參考文獻】

相關期刊論文 前10條

1 張國揚;朱樹先;王康;沈心怡;;基于ZigBee的嵌入式智能家居管理系統的設計和實現[J];電子設計工程;2016年02期

2 藏恒星;章國寶;朱葉盛;;基于CC2530的智能家居ZigBee模塊設計[J];工業控制計算機;2016年02期

3 張紫謙;衷衛聲;梁凱;;基于Android終端的物聯網家居環境監測系統設計[J];測控技術;2016年02期

4 傅軍棟;鄒歡;康水華;;PSO-SVM算法在智能建筑環境監控系統中的應用[J];華東交通大學學報;2016年01期

5 沈飛;;基于nRF24L01的無線溫度監控系統設計[J];自動化應用;2016年01期

6 陶冶;;基于Android和Internet的智能家居監控系統的設計[J];自動化與儀器儀表;2016年01期

7 姚建峰;郭旭展;;基于Zigbee技術的智能家居系統主控制器設計[J];軟件導刊;2016年01期

8 邵星;王翠香;;基于安卓的智能家居移動終端設計[J];軟件導刊;2015年12期

9 喬季軍;王德宇;李玉琳;石坤明;施云波;;融合ZigBee與WiFi無線技術智能家居系統的設計[J];自動化儀表;2015年12期

10 謝娟文;王串娥;;基于CC2530與移動終端的測控網關設計[J];蘭州工業學院學報;2015年06期

，

本文編號：1490334