【摘要】：針對使用轉換技術實現IPv4網絡與IPv6網絡通信存在的問題,文章提出了一種在數通產品上實現NAT64(由IPv6到IPv4的網絡地址轉換)的方案,該方案在充分分析NAT64工作原理的基礎上,力求結合現有數通產品的硬件平臺資源狀況和軟件平臺特性,既保證相關功能的完善實現,同時也盡可能地減少對系統資源的使用。對方案進行了測試驗證,結果表明,該方案能夠?qū)崿F(xiàn)NAT64的功能要求,自身運行性能達到設計預期,同時未對設備性能和網絡環境造成不良影響。
[Abstract]:Aiming at the problem of using conversion technology to realize the communication between IPv4 network and IPv6 network, this paper puts forward a scheme to realize NAT64 (network address translation from IPv6 to IPv4) on digital communication products, which is based on the analysis of the working principle of NAT64. This paper tries to combine the hardware platform resources and software platform characteristics of the existing digital products, not only to ensure the perfection of the related functions, but also to reduce the use of system resources as much as possible. The test results show that the scheme can meet the functional requirements of NAT64, and the performance of the scheme can meet the design expectations, while the performance of the device and the network environment are not adversely affected.
【作者單位】： 光纖通信技術和網絡國家重點實驗室;武漢郵電科學研究院;
【分類號】：TP393.04

【相似文獻】

相關期刊論文 前10條

1 崔瑞強;張鴻宇;;推動終端與應用升級,加速IPv6用戶與業務發展[J];電信網技術;2013年03期

2 吳光琳,林建平,李從心,阮雪榆;曲面造型中多張曲面交點處的過渡技術研究[J];中國機械工程;2002年05期

3 ;[J];;年期

4 ;[J];;年期

5 ;[J];;年期

6 ;[J];;年期

7 ;[J];;年期

8 ;[J];;年期

9 ;[J];;年期

10 ;[J];;年期

，

本文編號：2336944