本文關鍵詞： ZigBee局域網 廣域網 無線網關 有線網關 上位機　出處：《廣東工業大學》2014年碩士論文　論文類型：學位論文

【摘要】：ZigBee無線通信技術是一種新興的短距離無線通信技術,它具有低功耗、低速率、低時延等特性,而且還有強大的組網能力與超大的網絡容量,能夠被廣泛應用在家居與樓宇自動化、工業控制、醫療設備、消費電子產品等領域。由于受覆蓋區域的限制,通過ZigBee技術與廣域網進行有效的融合,實現對ZigBee網絡的遠程監控具有深遠的意義。 本論文介紹了ZigBee技術的原理和特點,廣域網的分類和不同網絡各自的特點,分析了ZigBee局域網的局限性和它與廣域網連接的必要性。對比不同的ZigBee芯片型號,選定TI公司CC2530芯片；分析了TI公司的Z-Stack協議棧。詳細闡述了ZigBee網絡通過不同的方式與廣域網連接方法；首先采取的是通過無線的方式把ZigBee網絡與廣域網連接,具體采用的是TI公司的CC2530芯片與華為公司的GTM900型GPRS模塊組成的無線網關實現ZigBee網絡與互聯網的連接；然后采取的是通過有線的方式把ZigBee網絡與廣域網連接,具體采取的是TI公司的CC2530芯片與Lantronix公司的XPort模塊組成的有線網關實現ZigBee網絡與ADSL網絡的連接。然后在QT的平臺下開發了遠程服務器的上位機程序,通過遠程實現對ZigBee網絡的信息的顯示、管理和控制。最后分別對無線網關和有線網關的連接進行測試。 組網測試的結果表明,ZigBee局域網與廣域網的連接,無論是通過無線網關還是有線網關連接性能都穩定并且時延小,能夠?qū)崿F(xiàn)對ZigBee網絡的遠程管理和控制。
[Abstract]:ZigBee wireless communication technology is a new short-range wireless communication technology. It has the characteristics of low power consumption, low rate, low delay and so on. Can be widely used in home and building automation, industrial control, medical equipment, consumer electronics and other fields. Due to the limits of coverage, through ZigBee technology and WAN for effective integration, It is of great significance to realize the remote monitoring of ZigBee network. This paper introduces the principle and characteristics of ZigBee technology, the classification of WAN and the characteristics of different networks, analyzes the limitations of ZigBee LAN and the necessity of connecting it to WAN. The CC2530 chip of TI Company is selected, the Z-Stack protocol stack of TI Company is analyzed, and the methods of connecting ZigBee network to WAN through different ways are described in detail. The first step is to connect ZigBee network to WAN by wireless way. The wireless gateway composed of TI's CC2530 chip and Huawei's GTM900 GPRS module is used to realize the connection between ZigBee network and Internet, and then the ZigBee network and WAN are connected by wired way. The cable gateway composed of TI's CC2530 chip and Lantronix's XPort module is used to realize the connection between ZigBee network and ADSL network. Then the host computer program of remote server is developed on the QT platform. The information of ZigBee network can be displayed, managed and controlled remotely. Finally, the connection between wireless gateway and wired gateway is tested. The results of networking test show that the connection between ZigBee LAN and WAN is stable and the delay is small, both through wireless gateway and wired gateway, which can realize the remote management and control of ZigBee network.
【學位授予單位】：廣東工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN92;TP393.2

【引證文獻】

相關期刊論文 前2條

1 張?zhí)m;王雷;;基于陶瓷基底厚膜印刷電阻的液壓油遠程監控系統設計[J];儀表技術;2017年03期

2 張成研;;基于ZigBee與GPRS的通信網關設計[J];企業技術開發;2015年10期

相關博士學位論文 前1條

1 史光坤;LTE/SAE系統密鑰管理方案的研究與改進[D];吉林大學;2017年

相關碩士學位論文 前1條

1 蘇菲;基于WLAN/LTE的多模電力通信終端設計與實現[D];東南大學;2016年

，

本文編號：1530151