【摘要】：為響應國家環保要求,在汽車動力系統應用新能源成為發展趨勢。隨著特斯拉的成功上市,把鋰電池替代汽油應用在汽車動力系統上成為了可能。而鋰電池最先是應用在電子產品上的,在汽車上應用鋰電池的要求和在用在電子產品上的要求有著很大的區別。鋰電池屬于高科技產品,存在研發成本高,生產周期長,質量一致性難以保證等問題。另外,市場是不斷變化的,如果不能快速推出有競爭力的新產品就可能導致顧客的流失。因此,高效率的研發流程是每個鋰電企業所追求的目標。且鋰電企業也將加入到汽車行業中,對企業的生產管理提出更高的要求:首先必須符合TS16949質量管理技術規范標準的要求,并要在新產品的開發流程中應用項目管理的方法。本文研究了如何符合TSl6949質量管理技術規范的要求,同時應用APQP、FMEA、SPC、MSA、PPAP這五大質量工具來建立新產品開發流程。整個研究建立在JV公司的鋰離子電池產品的基礎上,文章首先簡要介紹了TS16949和APQP,明確建立新產品開發流程的必要性;然后選取公司一款應用與汽車上的鋰離子電池產品為例,詳細陳述了在此型號電池上APQP流程的應用。最后得出結論,企業可以按照APQP流程來建立和開發新產品。通過此流程的應用,縮短了新型號電池的開發周期,由之前的半年縮短到了5個月,同時新品的直通率由78%提高到了86%。其中,五大質量工具是核心,通過在JV公司的應用為企業帶來巨大的經濟效益,也值得其他同行業的公司參考。
[Abstract]:In order to meet the requirements of national environmental protection, the application of new energy in automobile power system has become a development trend. With the successful listing of Tesla, it is possible to use lithium battery instead of gasoline in automobile power system. Lithium battery was first used in electronic products. There is a great difference between the requirements of using lithium battery in automobile and the requirement of using lithium battery in electronic products. Lithium battery belongs to high-tech products, which has many problems, such as high research and development cost, long production cycle, difficult to guarantee quality consistency and so on. In addition, the market is constantly changing, if we can not quickly launch competitive new products can lead to customer loss. Therefore, the efficient R & D process is the goal pursued by every lithium power enterprise. Lithium electric enterprises will also join the automobile industry, put forward higher requirements for the production management of enterprises: first of all, we must meet the requirements of TS16949 quality management technical specifications, and apply the method of project management in the development process of new products. In this paper, how to meet the requirements of TSl6949 quality management technical specification is studied, and the five quality tools of APQP,FMEA,SPC,MSA,PPAP are used to establish the new product development process. The whole research is based on the lithium-ion battery products of JV Company. firstly, this paper briefly introduces the necessity of establishing the new product development process clearly by TS16949 and APQP,. Then a company application and automotive lithium-ion battery products are selected as an example, and the application of APQP process on this type of battery is described in detail. Finally, it is concluded that enterprises can establish and develop new products according to APQP process. Through the application of this process, the development cycle of the new battery is shortened, from the previous half a year to five months, and the pass-through rate of the new product is increased from 78% to 86%. Among them, the five quality tools are the core, through the application in JV company to bring huge economic benefits to enterprises, but also worthy of reference by other companies in the same industry.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：F426.61;F273.2

【引證文獻】

相關碩士學位論文 前1條

1 馬杰;YK公司新產品研發項目質量管理研究[D];山東大學;2016年

，

本文編號：2496891