【摘要】：項目質量管理是項目管理的重要組成部分,其結果對產品和服務質量具有決定性的影響。隨著全球平板顯示制造業的重心向國內轉移,新的制造工廠項目不斷上馬,這對其相關配套材料——感光涂料提出了本地化生產的需求。目前,我國關于感光涂料的技術相比國外發達國家,還有幾乎是空白。因此,引進國外此類技術,建立一套適用于國內實情的質量管理框架顯得尤為重要。通過查閱文獻,綜合前人質量管理大師的質量管理理論,得出：質量管理就是為了最經濟(即資源最優化)地生產出充分滿足顧客質量要求的產品,并在每個階段應用科學的統計原理和方法。由于在技術項目轉讓的參與者——國外企業和國內企業在技術實力、產業結構和企業投入等方面相差甚大,盲目全盤拷貝其相關的質量管理體系,必定會造成資源浪費和管理難度及成本加大。在經過分析國外技術,從人、機、物、料、環等方面闡述了影響產品質量的因素。本文重點研究質量管理中的項目本地化質量控制和質量改進,包括運用統計工具、控制圖(Statistical Process Control,SPC)與工序能力指數來進行質量控制,運用測量系統分析(Measurement System Analysis,MSA)、試驗設計(Design of Experiments, DOE)、PDCA循環過程來進行質量改進,將引進項目在本地化生產的達到甚至超過原有的質量水平。本文將針對國外引進項目在本地化質量管理方面做出分析以及改善措施,為該項目質量管理體系的改善做好鋪墊的同時,可觸類旁通于我國一些同類項目,使之更有效地立足于市場,且在激烈的市場競爭中取得一定競爭優勢。
[Abstract]:Project quality management is an important part of project management, and its results have a decisive impact on the quality of products and services. As the center of gravity of the global flat-panel display manufacturing industry shifts to China, new manufacturing plant projects continue to be launched, which puts forward the need for localized production of photosensitive coatings, a related supporting material. At present, the technology of photosensitive coatings in our country is almost blank compared with the developed countries. Therefore, it is very important to introduce foreign technology and establish a quality management framework suitable for domestic situation. By referring to the literature and synthesizing the quality management theory of previous quality management masters, it is concluded that quality management is to produce products which fully meet customer quality requirements in the most economical (i.e. resource optimization) way. At each stage, the statistical principles and methods of science are applied. Because the participants in the transfer of technology projects, foreign and domestic enterprises, differ greatly in terms of technological strength, industrial structure and enterprise input, they blindly copy their related quality management system. Will certainly cause the waste of resources and management difficulty and cost increase. Through the analysis of foreign technology, the factors influencing the product quality are expounded from the aspects of human, machine, material, ring and so on. This paper focuses on the quality control and quality improvement of project localization in quality management, including the use of statistical tools, control chart (Statistical Process Control,SPC) and process capability index to carry out quality control, and use measurement system to analyze (Measurement System Analysis,MSA). The (Design of Experiments, DOE), PDCA cycle process is designed to improve the quality, and the local production will reach or exceed the original quality level. This paper will analyze and improve the localization quality management of the imported projects from abroad, which will pave the way for the improvement of the quality management system of the project. At the same time, it can be similar to some similar projects in our country. Make it more effective in the market, and in the fierce market competition to obtain a certain competitive advantage.
【學位授予單位】：中國科學院大學(工程管理與信息技術學院)
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：F273

【參考文獻】

相關期刊論文 前1條

1 云娜;;測量系統分析及其應用[J];天津科技;2010年06期

，

本文編號：2402357