本文選題：汽油機電噴系統 + 研發項目��； 參考：《天津工業大學》2017年碩士論文

【摘要】：汽油機電噴系統(GEEFIS)研發項目的風險日益增多,國內企業對GEEFIS研發項目的風險管理與控制尚未重視,雖然也采取了一些風險管理措施,但大部分不適應企業實際需要,收效甚微。國內企業只有建立MSF風險控制模型,不斷地改進實施的風險管理過程,才能保證GEEFIS研發項目一直處于最優的安全防護之下。本文在國內外許多研發項目風險管理與控制理論的基礎上,針對GEEFIS研發項目,提出了基于MSF模型的風險控制結構和風險識別、風險分析、風險計劃、風險跟蹤、風險控制和風險庫六個模塊的基本內容和技術方法。MSF模型利用各模塊的活動和相互的聯系,來對GEEFIS研發項目的風險給予及時處理,并為以后的風險控制提供建議和改進措施。提出了使用MSF模型進行風險管理的具體過程以及風險規劃、風險識別、風險評價、風險處理和風險監控五個階段設計的目標和主要活動。針對科森公司的GEEFIS研發項目實際情況,本文提出了國內企業通過前期準備,風險識別模塊構建、風險分析模塊構建、風險計劃模塊構建、風險追蹤模塊構建、風險控制模塊構建和風險知識庫模塊構建的過程來在GEEFIS研發項目中進行風險控制的具體實施過程、效果和對策。為汽油機設計企業實施MSF風險控制模型提供了具體方案,對如何實施GEEFIS研發項目風險管理與控制提供一個明確的可操作的指導。本文的研究,對于GEEFIS研發企業了解風險管理過程和MSF風險控制模型,以及使用MSF模型進行風險控制均具有重要的參考價值。
[Abstract]:The risk of the research and development project of gasoline engine Electronic injection system (GEEFIS) is increasing day by day. The risk management and control of the GEEFIS R & D project have not been paid much attention to in domestic enterprises. Although some risk management measures have been taken, most of them do not meet the actual needs of the enterprise and have little effect. Only by establishing MSF risk control model and continuously improving the risk management process can domestic enterprises ensure that GEEFIS R & D project is always under optimal security protection. Based on the risk management and control theory of many R & D projects at home and abroad, this paper puts forward the risk control structure and risk identification, risk analysis, risk planning, risk tracking based on MSF model for GEEFIS R & D projects. The basic contents and technical methods of six modules of risk control and risk base. MSF model utilizes the activities and interrelation of each module to deal with the risk of GEEFIS R & D project in time and provides suggestions and improvement measures for future risk control. The specific process of risk management using MSF model and the design objectives and main activities of risk planning, risk identification, risk evaluation, risk treatment and risk monitoring are presented. In view of the actual situation of GeEFIS R & D project of Corsen Company, this paper puts forward the domestic enterprises through the pre-preparation, risk identification module construction, risk analysis module construction, risk planning module construction, risk tracking module construction, The process of constructing risk control module and risk knowledge base module to carry out the concrete process, effect and countermeasure of risk control in GEEFIS R & D project. It provides a concrete scheme for the implementation of MSF risk control model in gasoline engine design enterprises, and provides a clear and operable guidance on how to implement the risk management and control of GEEFIS R & D project. The research in this paper has important reference value for GEEFIS R & D enterprises to understand the risk management process, MSF risk control model, and use MSF model for risk control.
【學位授予單位】：天津工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F426.6;F272.3

【參考文獻】

相關期刊論文 前10條

1 CHENG Anyu;LI Haining;XIONG Liangbo;;A Model-Based Calibration Method of Automotive Electronic Control Unit[J];Wuhan University Journal of Natural Sciences;2016年02期

2 Mingguang Zheng;Jinquan Yan;Jun Shentu;Lin Tian;Xujia Wang;Zhongming Qiu;;The General Design and Technology Innovations of CAP1400[J];Engineering;2016年01期

3 方江yN;;IT軟件項目風險管理研究[J];山西廣播電視大學學報;2015年04期

4 劉思蕙;;項目集成風險管理模型研究[J];住宅與房地產;2015年19期

5 文偉平;郭榮華;孟正;柏v，

本文編號：2117916