本文選題：通信勘察設計 + Android智能終端�。� 參考：《北京郵電大學》2015年碩士論文

【摘要】：隨著國內電信運營商的重組,通信工程勘察設計面臨著市場機遇和挑戰�？辈煸O(shè)計行業在激烈的競爭中,需要采取和實施有效的項目管理方法。更短的設計周期,更精細的質量要求,更多的個性化選擇是勘察設計的發展方向。 在現場勘察的過程中,設計人員的工作主要是大量的測量并記錄數據、拍攝現場照片等,完成后,要根據現場勘察的資料確定詳細的設計方案。而現場采集的數據包括圖片數據和紙質記錄的數據,后期的整理過程還需要人力進行識別、標注及錄入,十分影響效率。而且,在現場勘察及后期整理時,也容易出現數據的遺漏或錯誤的發生。 根據實際需要我們項目組開發完成了基于Android智能終端的通信勘察設計系統,該系統具備數據采集、GPS實時定位、標準化繪圖、拍照、水印于一體的強大功能。數據采集模塊是移動無線網絡勘察設計系統中重要的模塊之一。 主要工作如下： 1)通過對已有大量勘察表格數據和勘察人員數據采集習慣的分析,提出并實現了勘察設計系統中的數據采集功能模塊。數據采集模塊主要包括照片采集子模塊、表格數據采集子模塊、GPS采集子模塊、文件存儲子模塊、上傳下載子模塊等。 2)給出了數據采集模塊下各個子功能模塊的設計思路和具體實現方法,以及在設計過程中一些關鍵性問題的解決方案。 3)完成了實際的軟件開發工作,并給出了實際的運行示例。 數據采集模塊通過對目前的現場勘查過程中數據的采集、后期的數據整理、數據保存及工程項目的管理等流程進行優化,達到了降低人力資源成本、提高勘察設計效率、保證勘察設計質量的目的。實際測試及使用結果說明了設計合理可行,達到了設計要求。
[Abstract]:With the reorganization of domestic telecom operators, communication engineering survey and design is facing market opportunities and challenges. In the fierce competition, the survey and design industry needs to adopt and implement effective project management methods. Shorter design cycle, more fine quality requirements and more individualized selection are the development direction of survey and design. In the process of site investigation, the designer's work is mainly to measure and record a large number of data, take photos of the scene, etc. After completion, the detailed design scheme should be determined according to the data of site investigation. The data collected in the field include picture data and paper record data. The finishing process also needs manpower to identify, mark and input, which has a great impact on the efficiency. Furthermore, data omissions or errors are likely to occur during site investigation and post-sorting. According to the actual needs, a communication reconnaissance and design system based on Android intelligent terminal is developed by our project team. The system has the powerful functions of real-time positioning of data acquisition and GPS, standardization of drawing, photographing and watermarking. Data acquisition module is one of the important modules in mobile wireless network survey and design system. The main work is as follows: 1) based on the analysis of a large number of survey table data and survey personnel data collection habits, the paper proposes and realizes the data acquisition function module in the survey and design system. The data acquisition module mainly includes the photo acquisition sub-module, the form data acquisition sub-module and the GPS acquisition sub-module, the file storage sub-module. Upload and download sub-modules, etc. 2) gives the design ideas and specific implementation methods of each sub-function module under the data acquisition module. And the solution of some key problems in the design process. 3) completed the actual software development work, and gave the actual operation examples. The data acquisition module optimizes the process of data collection, data collation, data preservation and project management in the current field survey process, which can reduce the cost of human resources and improve the efficiency of survey and design. The purpose of ensuring the quality of survey and design. The practical test and application results show that the design is reasonable and feasible and meets the design requirements.
【學位授予單位】：北京郵電大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TP274.2

【參考文獻】

相關期刊論文 前10條

1 羅菊;袁泉;;對TD-SCDMA基站的無線網絡勘察設計的思考[J];重慶郵電大學學報(自然科學版);2008年S1期

2 白彥輝;;Excel報表在Java技術中的應用研究[J];赤峰學院學報(自然科學版);2011年10期

3 王斌;;Http上傳技術的Java實現[J];電腦編程技巧與維護;2008年06期

4 楊立身;曹志義;;內存緩存技術在門戶網站開發中的應用研究[J];電腦知識與技術;2008年25期

5 孔霞;呂峰;;基于Spring的Web框架的設計及其應用[J];電腦知識與技術;2009年18期

6 田珂,謝世波,方馬;J2EE數據持久層的解決方案[J];計算機工程;2003年22期

7 羅榮,唐學兵;基于JDBC的數據庫連接池的設計與實現[J];計算機工程;2004年09期

8 寇毅,吳力文;基于MVC設計模式的Struts框架的應用方法[J];計算機應用;2003年11期

9 陸榮幸,郁洲,阮永良,王志強;J2EE平臺上MVC設計模式的研究與實現[J];計算機應用研究;2003年03期

10 孫鶴川;;對通信建設工程的質量控制探討[J];內蒙古科技與經濟;2005年24期

，

本文編號：2090473