本文關鍵詞： 物流仿真 逼真度 過程管理 仿真效用 仿真代價 均衡　出處：《北京郵電大學》2015年碩士論文　論文類型：學位論文

【摘要】：本文通過建立基于逼真度的建模與仿真過程管理可操作方法,來實現仿真效用和仿真代價的優化均衡,不斷提高建模仿真活動的效益和效率,并通過實例應用驗證了該方法的合理性。 首先,明確了過程管理對象即逼真度、仿真效用和仿真代價的含義并分別對其進行維度劃分,描述了逼真度與仿真效用以及逼真度與仿真代價之間的關系。在此基礎上分析了過程管理目標的含義以及實現條件。 然后,構建了基于逼真度的建模與仿真過程管理框架,把管理過程分為建模仿真前的逼真度需求確定、建模仿真中的逼真度控制、建模仿真后的管理評價和改進三個階段,并分別對每個階段的管理建立了過程模型,分析了各階段各項活動的管理目標和活動之間的聯系。 接著,制定了各項管理活動的操作步驟,為建模與仿真實踐中如何實現管理目標提供了行動指南,使過程管理的行為規范化。其中,建立了逼真度模板表作為工具以及效用-逼真度映射法用于逼真度需求確定和逼真度控制等活動。 最后,以機場行李處理系統實例,將建立的基于逼真度的建模與仿真過程管理方法應用到實踐中,并分析了方法的應用效果。 本文建立的基于逼真度的建模與仿真過程管理方法是適用于物流系統仿真的而且是可操作的,通過形成計劃-實施-臨控-改進的管理循環,能在建模仿真開始前和進行中確保仿真效用和仿真代價的優化均衡,并不斷提高建模仿真活動的效益和效率。
[Abstract]:In this paper, based on fidelity modeling and simulation process management operable method, we achieve the optimization equilibrium between simulation utility and simulation cost, and continuously improve the efficiency and efficiency of modeling and simulation activities. The rationality of the method is verified by case application.
First of all, the process management is the object of the fidelity of simulation and Simulation of the concept of cost and utility of the dimensions, describes the relationship between the fidelity and fidelity of the simulation and Simulation of utility and cost. Based on the analysis of the process management of the meaning and the conditions.
Then, the modeling and Simulation of construction process management framework based on fidelity, the management process is divided into realistic demand modeling and simulation calculation before, fidelity control modeling and Simulation of the three stages of management evaluation and improvement after modeling and simulation, and separately for each stage of the management process model is established and analyzed between the management objectives and activities of the activities of the various stages of contact.
Then, make the operation steps of the management activities, provides guidelines for how to achieve the management goal of modeling and Simulation in practice, the behavior process management. Among them, the establishment of the fidelity of the template table as a tool and utility - Fidelity mapping method is used to determine the fidelity and fidelity requirements of control activities.
Finally, taking the case of airport baggage handling system as an example, the fidelity modeling and simulation process management method is applied to practice, and the application effect of the method is analyzed.
The modeling and simulation process management method based on fidelity and is applicable to the logistics system simulation is feasible, by forming a plan - Implementation - control - improved management cycle, to ensure optimal equilibrium simulation and simulation cost utility in modeling and simulation before and progress, and constantly improve the efficiency and the efficiency of modeling and simulation activities.

【學位授予單位】：北京郵電大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TP391.9

【參考文獻】

相關期刊論文 前9條

1 梁義芝;張維石;康曉予;張國;;仿真模型重用方法綜述[J];計算機仿真;2008年08期

2 田曉飛;馬麗華;趙尚弘;董毅;宋程遠;;半實物仿真中紅外場景的模擬可信度評估[J];紅外與激光工程;2012年09期

3 丁秀華;孫力;趙寧;陳琳;;煙草配送中心仿真模塊化研究[J];物流技術;2011年01期

4 黃安祥;潘志;陳宗基;李勁松;;現代軍機仿真逼真度的研究[J];系統仿真學報;2005年12期

5 楊惠珍;康鳳舉;閻晉屯;;一種基于AHP的仿真可信度評估方法研究[J];系統仿真學報;2006年S2期

6 周東祥;仲輝;鄧睿;李群;王維平;;復雜系統仿真的可組合問題研究綜述[J];系統仿真學報;2007年08期

7 唐凱;康鳳舉;;基于模糊AHP的視景仿真系統逼真度評估方法研究[J];系統仿真學報;2008年22期

8 郭春明;申亞楠;王雪榮;桂良軍;;基于作業成本法的參數成本估算模型與方法研究[J];系統工程理論與實踐;2006年02期

9 唐任仲,周廣民,湯洪濤;過程管理建模技術分析[J];浙江大學學報(工學版);2002年04期

，

本文編號：1530100