本文關鍵詞：模組屏物流包裝系統設計　出處：《包裝工程》2017年01期 　論文類型：期刊論文

  更多相關文章： 模組屏 跌落沖擊 跌落模擬 三維建模

【摘要】：目的研究模組屏物流包裝形式、結構及包裝工藝操作性。方法針對模組屏自身特點,對其原臥式包裝形式進行改進,設計模組屏立式包裝。利用三維建模軟件建立緩沖襯墊和模組屏模型后,將兩者進行裝配。將包裝三維模型導入仿真軟件Ansys Workbench中,設置材料屬性后,對其進行有限元網格劃分,再對各物理性能進行模擬仿真分析。結果對模組屏立式包裝提出了通用化包裝設計方案,實現了直下式模組屏立式包裝。結論采用通用化緩沖襯墊包裝的模組屏在跌落過程中受到的加速度最大為610.58 m/s2,比原包裝減小了26.8%,比每片同尺寸臥式包裝的成本降低了26.57%,可通用5種原型機,大幅度提高了包裝效率,降低了包裝成本。
[Abstract]:Objective to study the logistics packaging form, structure and operation of packaging technology of module panel. Methods according to the characteristics of module panel, the original horizontal packaging form was improved. The model panel vertical packaging was designed. The cushioning cushion and the module screen model were built by using 3D modeling software, and the two models were assembled. The package 3D model was imported into the simulation software Ansys Workbench. After setting the properties of the materials, the finite element mesh is used to divide them, and then the physical properties are simulated and analyzed. The results show that the universal package design scheme is put forward for the vertical packaging of the module panel. The vertical packaging of straight down module panel was realized. Conclusion the maximum acceleration of the module panel with universal cushioning pad packaging is 610.58 m / s ~ (2) during the drop process. Compared with the original packaging, the cost of the horizontal packaging is 26.57 lower than that of the original packaging. The general use of five prototypes can greatly improve the packaging efficiency and reduce the packaging costs.
【作者單位】： 青島科技大學;
【分類號】：TB485.1
【正文快照】： 家電行業競爭越來越激烈,成本成為制約其發展的瓶頸,在滿足產品功能和質量要求的基礎上,各個企業都在想方設法地降低成本,如改變產品結構、材料等方法。從Mindlin發表了關于緩沖包裝的論文開始,緩沖材料的力學特征、產品脆值測試、包裝動力學模型、運輸包裝設計法相繼被提出,

【相似文獻】

相關期刊論文 前2條

1 張小五;繼電保護的高頻(光纖)接口的配置與組屏[J];電力建設;1997年07期

2 ;[J];;年期

相關會議論文 前1條

1 郭廷良;陳建國;;關于變電站微機保護就地安裝的探討與保護單元介紹[A];華東六省一市電機工程（電力）學會輸配電技術研討會2002年年會山東電機工程學會交流論文集[C];2002年

，

本文編號：1430934