本文選題：可持續績效　切入點：再制造　出處：《西安理工大學》2017年碩士論文

【摘要】：當今社會,伴隨著經濟飛速發展的同時,環境問題和社會問題層出不窮,人類的生存和發展受到嚴重的威脅,可持續發展理念應運而生。作為環境問題主要來源的制造領域,誕生了一種新的制造模式,即再制造。隨著可持續發展理念、再制造和再制造供應鏈的誕生,關于再制造與再制造供應鏈研究中也出現了眾多的新問題。在已有文獻的基礎上,本文將對以下三個問題展開研究,即再制造實現可持續績效的機理是什么?無差別定價的再制造供應鏈協調策略是什么?差別定價的再制造供應鏈協調策略是什么?主要研究工作有:(1)研究了再制造實現可持續績效的機理,首先構建再制造背景下可持續績效指標體系,分析再制造的經濟效益、環境效益和社會效益,然后以效益與績效之間的關系為切入點,設計研究框架,通過理論分析凝練出再制造實現可持續績效的機理;最后以法士特集團有限責任公司為研究對象進行案例分析,來驗證理論分析的結果。(2)針對由單一制造商和經銷商構成的再制造供應鏈系統,不僅考慮政府對廢舊產品回收的獎懲機制,而且考慮環境因素,即制造商的生產活動對環境危害程度,基于博弈論的方法,對分散供應鏈決策和集中供應鏈決策模式下再制造供應鏈系統無差別定價情況下新產品、再制造產品和廢舊產品回收的定價策略進行研究,在此基礎上,研究了面向可持續績效的再制造供應鏈無差別定價協調策略,最后通過算例分析分別對比了分散、集中和協調這三種決策模式下的最優決策結果。(3)針對由單一制造商和經銷商構成的再制造供應鏈系統,不僅考慮政府對廢舊產品回收的獎懲機制,而且考慮環境因素,即制造商的生產活動對環境危害程度,基于博弈論的方法,對分散供應鏈決策和集中供應鏈決策模式下再制造供應鏈系統差別定價情況下新產品、再制造產品和廢舊產品回收的定價策略進行研究,在此基礎上,研究了面向可持續績效的再制造供應鏈差別定價協調策略,最后通過算例分析分別對比了分散、集中和協調這三種決策模式下的最優決策結果。通過本文的研究,所得出的結論和管理啟示不僅推動了再制造供應鏈協調的理論研究,同時對實踐具有一定的指導作用。
[Abstract]:In today's society, with the rapid development of economy, environmental and social problems emerge in endlessly, the survival and development of human beings are seriously threatened, and the concept of sustainable development emerges as the times require.As the main source of environmental problems, a new manufacturing model, remanufacturing, has emerged.With the concept of sustainable development and the birth of remanufacturing and remanufacturing supply chain, there are many new problems in the research of remanufacturing and remanufacturing supply chain.Based on the existing literature, this paper will study the following three issues: what is the mechanism of remanufacturing to achieve sustainable performance?What is the coordination strategy of the remanufacturing supply chain without differential pricing?What is the remanufacturing supply chain coordination strategy of differential pricing?The main research work is as follows: (1) the mechanism of remanufacturing to achieve sustainable performance is studied. Firstly, the sustainable performance index system under the background of remanufacturing is constructed, and the economic, environmental and social benefits of remanufacturing are analyzed.Then the relationship between benefit and performance as the breakthrough point, design research framework, through theoretical analysis of the mechanism of remanufacturing to achieve sustainable performance; finally, Fastor Group Co., Ltd. as a case study,To verify the results of the theoretical analysis. (2) for a remanufacturing supply chain system composed of a single manufacturer and a distributor, not only the government's reward and punishment mechanism for recycling used and used products is considered, but also environmental factors are taken into account.That is, the degree of environmental harm caused by manufacturer's production activities, based on the method of game theory, the new products under the model of decentralized supply chain decision and centralized supply chain decision are remanufactured under the condition of non-differential pricing of supply chain system.On the basis of the research on the pricing strategy of remanufacturing product and waste product recovery, this paper studies the sustainable performance oriented non-differential pricing coordination strategy of the remanufacturing supply chain. Finally, through the example analysis, the dispersion is compared.Centralizing and coordinating the optimal decision results under these three decision models) for a remanufacturing supply chain system consisting of a single manufacturer and a distributor, not only the government's reward and punishment mechanism for recycling used and used products is considered, but also environmental factors are taken into account.That is, the manufacturer's production activities are harmful to the environment. Based on the game theory method, the new products under the condition of decentralized supply chain decision and centralized supply chain decision mode under the condition of differential pricing of the remanufacturing supply chain system are studied.On the basis of the research on the pricing strategy of remanufacturing products and scrap products recovery, the differential pricing coordination strategy of remanufacturing supply chain oriented to sustainable performance is studied. Finally, the dispersion is compared by example analysis.The optimal decision results under these three decision models are centralized and coordinated.Through the research of this paper, the conclusions and management enlightenment not only promote the theoretical research of remanufacturing supply chain coordination, but also have a certain guiding role to practice.
【學位授予單位】：西安理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F274;F426.4

【參考文獻】

相關期刊論文 前10條

1 徐濱士;梁秀兵;史佩京;蔡志海;;我國再制造工程及其產業發展[J];表面工程與再制造;2015年02期

2 韓玉勇;劉云輝;王士柱;;機床再制造問題研究[J];現代制造技術與裝備;2015年02期

3 向寧;梅鳳喬;葉文虎;;中國廢棄家用電器回收渠道建設初探[J];生態經濟;2015年03期

4 張振洲;韓龍;;再制造零部件清洗技術[J];清洗世界;2014年02期

5 孫嘉軼;滕春賢;陳兆波;;基于回收價格與銷售數量的再制造閉環供應鏈渠道選擇模型[J];系統工程理論與實踐;2013年12期

6 高陽;楊新;;基于WTP差異化的再制造閉環供應鏈利益協調機制[J];計算機應用研究;2014年02期

7 吳鵬;;回收再制造供應鏈協調問題研究[J];華南理工大學學報(社會科學版);2013年02期

8 周占峰;;政府補貼下再制造逆向供應鏈產品回收定價策略研究[J];物流技術;2012年19期

9 周文泳;胡雯;尤建新;劉光富;;產品服務系統下的機電產品再制造模式——基于BT公司的案例分析[J];管理案例研究與評論;2012年02期

10 魏杰;趙靜;;不確定環境下制造再制造供應鏈定價與協調問題研究[J];模糊系統與數學;2012年02期

相關碩士學位論文 前1條

1 汪洪雷;汽車報廢發動機再制造處理與綜合效益分析[D];重慶交通大學;2012年

，

本文編號：1692108