【摘要】：國家會展中心是由主展廳及相關配套建筑組成的特大型會展綜合體項目。4個主展廳單體覆蓋面積大,各單體鋼屋蓋平面投影尺寸為297m×350m,為大跨、大懸挑、超長的結構形式。介紹了主展廳鋼屋蓋的結構方案演變過程以及鋼屋蓋的抗風設計和為降低溫度變化影響所采取的技術手段。主展廳鋼屋蓋是在綜合考慮建筑功能需要、外觀效果及結構安全可靠和結構經濟性等因素的前提下,經過多方案比選,確定采用空間桁架結構體系。通過在屋蓋懸挑部位設置抗風拉桿,有效降低風吸作用下桁架懸臂端的變形以及桁架桿件的內力。采用橡膠支座可有效解決由于溫度變化在超長鋼結構中產生的過大溫度應力的問題。主展廳鋼屋蓋結構選型合理,可實現結構的安全可靠并具有較好的經濟性。
[Abstract]:The National Convention and Exhibition Center is a super large scale exhibition complex project composed of main exhibition hall and related supporting buildings. The four main exhibition halls have large coverage area, and the projection size of each single steel roof is 297m 脳 350m, which is a large span, large cantilever and super long structure form. This paper introduces the evolution process of the structural scheme of the steel roof of the main exhibition hall, the wind-resistant design of the steel roof and the technical measures to reduce the influence of temperature change. The steel roof of the main exhibition hall is determined to adopt the space truss structure system on the premise of the comprehensive consideration of the building function, the appearance effect, the safety and reliability of the structure and the economic efficiency of the structure, and through the comparison and selection of many schemes, the space truss structure system is adopted. In order to reduce the deformation of the cantilever end of the truss and the internal force of the truss member under the action of the wind suction, the anti-wind pull rod is set in the cantilever part of the roof. Rubber bearing can effectively solve the problem of excessive temperature stress caused by temperature change in super long steel structure. The steel roof structure selection of the main exhibition hall is reasonable, which can realize the safety and reliability of the structure and have better economy.
【作者單位】： 華東建筑設計研究總院;清華大學建筑設計研究院;
【分類號】：TU973.13

【相似文獻】

相關期刊論文 前7條

1 ;建筑與城市生活(摘要)[J];建筑學報;1999年01期

2 范重,尤天直,王春光,沈婭萍;寧波國際會展中心主展廳結構設計[J];建筑結構;2003年06期

3 ;寧波國際會展中心[J];智能建筑電氣技術;2003年04期

4 丁生根;;南京會展中心主展廳屋架結構設計[J];空間結構;2010年02期

5 宋濤;趙基達;王慶揚;;湛江會展中心主展廳鋼結構設計[J];建筑結構;2006年S1期

6 ;行業新聞[J];裝飾;2010年10期

7 李越;東莞國際會展中心[J];室內設計與裝修;2003年04期

相關會議論文 前1條

1 宋濤;趙基達;王慶揚;;湛江會展中心主展廳鋼結構設計[A];首屆全國建筑結構技術交流會論文集[C];2006年

相關碩士學位論文 前1條

1 耿進寶;德宏州反腐倡廉警示教育基地設計[D];昆明理工大學;2013年

，

本文編號：2397404