本文選題：政府獎懲 + 差別定價��； 參考：《重慶理工大學》2017年碩士論文

【摘要】：伴隨著“兩型”(資源節約型、環境友好型)社會的建設和循環經濟的發展,更加強調對資源的循環使用和環境的保護。目前,我國每年的固體垃圾污染現象十分嚴重。為了節約資源、保護環境,我國立法機構和政府相繼出臺法律法規,強調對廢舊品進行回收再制造。政府和企業作為主要參與主體承擔著重要的責任和義務。本文以政府獎懲制造商為前提,以新產品和再制品的批發價格和銷售價格差別定價為條件,展開對廢舊品回收再制造模式的研究。首先,在已有的文獻資料基礎上,對國內外的研究現狀進行了歸納總結,運用相關理論基礎闡釋了廢舊品回收再制造閉環供應鏈模式。其次,運用定量的分析方法構建三種回收數學模型——制造商回收模式(M模式)、制造商委托零售商回收模式(RM-模式)、制造商委托第三方服務商回收模式(TPM-模式)。在此基礎上,采用算例分析方式探討了政府獎懲因子和最低回收率對相關參數的影響,并從政府、制造商、零售商以及閉環供應鏈和消費者等維度對每種回收模式下的相關情況進行了總結。最后,對三種回收模式下的研究結果進行了對比分析,確定了制造商回收模式實現了回收效率和閉環供應鏈利益最優的結論,并從政府獎懲措施、制造商回收措施和供應鏈回收流程管理三個角度提出了相應的回收對策,有利于提高廢舊產品的回收效率和企業的最優利潤,保障了政府獎懲政策的有效性,對開展廢舊品回收再制造工程具有重要意義。
[Abstract]:With the construction of "two types" (resource-saving, environment-friendly) society and the development of circular economy, more emphasis is placed on the recycling of resources and the protection of the environment.At present, the pollution of solid waste every year in China is very serious.In order to save resources and protect the environment, the legislature and government of our country have issued laws and regulations one after another, emphasizing recycling and remanufacturing of waste products.Government and enterprises as the main participants bear important responsibilities and obligations.Based on the premise of government reward and punishment of manufacturers and the differential pricing of wholesale price and sale price of new products and remanufactured products, this paper studies the model of recycling and remanufacturing of waste and used products.Firstly, based on the existing literature, the current research situation at home and abroad is summarized, and the closed-loop supply chain model of recycling and remanufacturing of waste goods is explained based on the relevant theory.Secondly, using quantitative analysis method, we construct three kinds of mathematical models of recycling: manufacturer recycling model, manufacturer commissioned retailer recovery model, manufacturer commissioned third party service provider recovery model and TPM-model.On this basis, the effects of the government reward and punishment factors and the minimum recovery rate on the relevant parameters are discussed by using a numerical example, and from the government, manufacturers,Retailers, closed-loop supply chains and consumers, etc., summarize the relevant situation in each recovery mode.Finally, the research results of three kinds of recycling models are compared and analyzed, and the conclusion that the manufacturer recycling mode realizes the optimal recovery efficiency and the benefit of the closed-loop supply chain is determined, and the government rewards and punishment measures are given.The recovery measures of manufacturer and the management of supply chain recycling process put forward the corresponding recovery countermeasures, which can improve the recovery efficiency of waste products and the optimal profit of enterprises, and ensure the effectiveness of government reward and punishment policy.It is of great significance to carry out recycling and remanufacturing engineering of waste products.
【學位授予單位】：重慶理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：D922.68;F274

【參考文獻】

相關期刊論文 前10條

1 李新然;吳義彪;;政府“以舊換再”補貼下的差別定價閉環供應鏈[J];系統工程理論與實踐;2015年08期

2 郭軍華;李幫義;倪明;;WTP差異下再制造閉環供應鏈的回收模式選擇[J];管理學報;2015年01期

3 王文賓;陳祥東;達慶利;聶銳;陳偉達;;制造商競爭環境下逆向供應鏈的政府獎懲機制研究[J];運籌與管理;2014年03期

4 崔木花;侯永軼;;廢棄電子產品回收處理體系構建及實現路徑[J];中國發展;2014年03期

5 潘曉勇;巫江;劉永亮;賈春蘭;魏丹;;廢舊家電回收逆向物流網絡優化模型設計[J];河南科學;2013年10期

6 張桂濤;胡勁松;孫浩;董岳;;具有缺陷產品的雙渠道閉環供應鏈網絡均衡[J];中國管理科學;2013年05期

7 張譯勻;楊希;于黃燕;;廢舊電子產品逆向物流現狀及優化對策[J];經濟視角(下);2013年07期

8 黃宗盛;聶佳佳;胡培;;基于微分對策的再制造閉環供應鏈回收渠道選擇策略[J];管理工程學報;2013年03期

9 王玉燕;;需求與成本雙擾動時閉環供應鏈的生產策略和協調策略[J];系統工程理論與實踐;2013年05期

10 洪憲培;王宗軍;趙丹;;閉環供應鏈定價模型與回收渠道選擇決策[J];管理學報;2012年12期

相關會議論文 前1條

1 呂祥;;國內外電子廢棄物處理技術現狀[A];節能環保 和諧發展——2007中國科協年會論文集（一）[C];2007年

，

本文編號：1758663