本文研究了連續運動感應熔覆層的溫度場演變和熱影響區的深度,建立了點式連續移動感應熔覆的三維有限元模型以研究固定和移動感應熔覆模型的溫度分布,設計了一種適用于曲面熔覆的新感應器,通過溫度測量驗證了模型的可靠性。研究了工藝參數對最高溫度的影響和熱量的產生與傳遞。對熔化速率進行了定量計算來驗證溫度的分布和顯微組織的關系。結果表明,熔覆層與基體之間可形成良好的冶金結合,從熔覆層頂部到基體熔化速率逐漸降低,基體中的晶粒尺寸逐漸增大。與整體加熱相比,連續移動局部感應熔覆熱影響區相對較小。 

【文章來源】：Journal of Central South University. 2020,27(05)EISCICSCD

【文章頁數】：15 頁

【文章目錄】：
1 Introduction
2 Establishment of finite element model
    2.1 Design of new inductor
    2.2 Description of eddy current field model
    2.3 Description of temperature field model
    2.4 Geometrical model and mesh generation
3 Experimental validation
4 Results and discussion
    4.1 Temperature evolution and model validation of fixed induction cladding
    4.2 Temperature distribution of continual motion induction cladding
    4.3 Effects of main process parameters on the maximum temperature
    4.4 Induction cladding heat generation and transfer pathways
    4.5 Verification of microstructures and temperature distribution based on meltingrate
5 Conclusions


【參考文獻】：
期刊論文
[1]Numerical analysis of 3D spot continual induction hardening on curved surface of AISI 1045 steel[J]. 高愷,汪舟,秦訓鵬,朱生霄.  Journal of Central South University. 2016(05)



本文編號：3239421