【摘要】：以無錫某地道路施工近距離經過尼康光學儀器廠為研究背景,對現場道路邊和廠區內精密儀器所在位置的環境振動進行測試。對測試數據進行統計和處理,得出振動壓路機振動速度以及鉛垂向Z振級衰減規律,預測廠區精密儀器處振動幅值;并與實測值進行對比。結合國際通用的VC標準,以此評價壓路機振動對精密儀器的影響。研究結果表明,壓路機引起的地面振動速度和鉛垂向Z振級隨振心距的增大逐漸減小,衰減規律符合負冪函數關系曲線。預測精密儀器位置處振速v=3.974×10~(-2)mm/s介于VC-A和VC-B曲線之間,滿足企業提出的精密儀器振動控制標準。預測精密儀器位置處鉛垂向Z振動級VL_z=67.519 db,接近VC-A曲線限值,基本滿足企業提出的控制標準。在不考慮精密儀器基礎隔振系統的影響下,預測值基本符合環境振動分析儀測量值。
[Abstract]:Based on the research background of Wuxi Road Construction close through Nikon Optical instrument Factory, the environmental vibration of precision instruments on the side of the road and in the factory area is tested. Based on the statistics and processing of the test data, the vibration velocity of vibratory roller and the attenuation law of vertical Z vibration level are obtained, and the vibration amplitude at the precision instrument in the factory area is predicted, and the vibration amplitude is compared with the measured value. Combined with the international VC standard, the influence of roller vibration on precision instruments is evaluated. The results show that the ground vibration velocity and vertical Z vibration level caused by roller decrease gradually with the increase of vibration center distance, and the attenuation law accords with the negative power function curve. The vibration velocity v 鈮，

本文編號：2521838