【摘要】：針對備件庫存控制策略決策的復雜性,以提高備件分類的有效性,降低庫存成本為目標,提出了一種基于DEA備件分類的庫存控制策略模型。首先,根據備件使用和管理所關注的不同屬性,建立備件分類指標體系,從部門決策的角度利用SE-DEA模型和AHP求得賦權效率值進而對備件重要性進行評價,結合備件的周轉率構建備件庫存策略二維決策網格對備件進行二維分類,并匹配具體的庫存控制策略,之后使用Plant Simulation仿真軟件通過實驗設計獲取不同類別備件的最優庫存參數。最后,將該模型應用于L公司的備件庫存控制策略改善項目中,驗證了模型的準確性和有效性。
[Abstract]:Aiming at the complexity of decision making of spare parts inventory control strategy, aiming at improving the effectiveness of spare parts classification and reducing inventory cost, a inventory control strategy model based on DEA spare parts classification is proposed. First of all, according to the different attributes of spare parts usage and management, the classification index system of spare parts is established, and then the importance of spare parts is evaluated by using SE-DEA model and AHP to obtain the weight efficiency value from the angle of department decision. Combined with the turnover of spare parts, the two-dimensional decision grid of spare parts inventory strategy was constructed to classify the spare parts and match the specific inventory control strategies. Then the optimal inventory parameters of different types of spare parts were obtained by using Plant Simulation simulation software. Finally, the model is applied to the improvement project of spare parts inventory control strategy of L Company, and the accuracy and validity of the model are verified.
【作者單位】： 中國礦業大學礦業工程學院;
【分類號】：TB497

【相似文獻】

相關期刊論文 前1條

1 袁文彬;朱建新;莊力健;方向榮;;基于風險的石化備件庫存優化技術研究及工程應用[J];石油和化工設備;2012年06期

，

本文編號：2405890