【摘要】：針對設計更改執行階段效率的問題,從知識傳遞角度分析了設計更改執行過程中的知識流動機制,結合設計更改執行過程活動的離散并行性、邏輯時序性以及知識顯/隱性轉化特點,提出了基于改進時序Petri網的設計更改執行過程知識流建模方法和面向知識流分析的知識活動解構方法,建立了設計更改執行過程改進模型。提出了基于KFO-TPN模型的設計更改執行過程關鍵路徑識別算法,以及基于語義信息增益和結構信息增益的設計更改過程知識流動合理性分析方法。以某研制型企業中設計更改單在車間內執行階段的過程改進為例驗證了所提方法的有效性。
[Abstract]:Aiming at the efficiency of design change execution, this paper analyzes the mechanism of knowledge flow in design change execution from the point of view of knowledge transfer, and combines the discrete parallelism of design change execution process. Based on the logic timing and the characteristics of knowledge explicit / tacit transformation, a modeling method of knowledge flow in design change execution process based on improved sequential Petri nets and a knowledge activity deconstruction method for knowledge flow analysis are proposed. A design change execution process improvement model is established. A key path identification algorithm for design change execution process based on KFO-TPN model is proposed, and the rationality analysis method of knowledge flow in design change process based on semantic information gain and structure information gain is presented. The effectiveness of the proposed method is verified by an example of the process improvement of the design change order in the workshop during the execution phase in a R & D enterprise.
【作者單位】： 北京航空航天大學機械工程及自動化學院;
【基金】：國防技術基礎研究資助項目(JSZL2014204A002) 國防基礎科研資助項目(JCKY2016209B001)~~
【分類號】：TB497

【相似文獻】

相關期刊論文 前3條

1 劉曉健;張樹有;張建新;張金美;;產品設計更改在弱連接結構上的傳播[J];浙江大學學報(工學版);2012年06期

2 趙琥;王欣;敖亮;;產品微小設計更改的可靠性鑒定試驗方案研究[J];航空標準化與質量;2012年05期

3 ;[J];;年期

相關博士學位論文 前1條

1 劉曉健;面向復雜定制產品的設計更改關鍵技術及應用研究[D];浙江大學;2011年

，

本文編號：2357597