【摘要】：針對液壓缸零件直線度誤差檢測困難的現狀,提出一種通過測量液壓缸截面弦長確定截面圓心評估液壓缸軸線直線度的方法,以激光作為直線度誤差評定的參照直線,設計了一種基于氣動檢測與激光準直的直線度檢測裝置;分析了噴嘴曲面擋板模型下的氣動檢測方案,分析了PSD位置敏感傳感器的空間位置,并提出了利用PSD位置敏感傳感器分離誤差的方法;利用該裝置進行了直線度誤差檢測,檢測過程穩定,能夠滿足要求。
[Abstract]:In view of the difficulty of measuring the straightness error of hydraulic cylinder parts, a method of determining the axis straightness of hydraulic cylinder by measuring the chord length of hydraulic cylinder section is presented. The laser is used as the reference line for straightness error evaluation. A straightness detecting device based on pneumatic detection and laser collimation is designed, the pneumatic detection scheme based on the nozzle surface baffle model is analyzed, and the spatial position of PSD position sensitive sensor is analyzed. The method of separating error by using PSD position sensitive sensor is put forward, and the straightness error is detected by using this device, the process of detection is stable and can meet the requirements.
【作者單位】： 陜西鐵路工程職業技術學院機電工程系;
【基金】：國家自然科學基金資助項目(51375380)
【分類號】：TH137.51

【相似文獻】

相關期刊論文 前4條

1 張慶英;直線度誤差測量中若干問題的分析[J];武漢交通科技大學學報;1997年03期

2 陸曉珩;;對直線度誤差和數據處理的研究[J];工業計量;2014年01期

3 楊雪,張英芝,陳淑蘭;雙測頭消差法測量直線度誤差的數據處理電算法[J];計量技術;1997年05期

4 劉偉;崔為國;劉延斌;;噪聲環境下直線度誤差分離的最小均方誤差方法[J];機械科學與技術;2007年10期

，

本文編號：2252535