不同壓力下具有內熱源的包裝箱內傳熱特性
發布時間：2018-07-25 20:51
【摘要】：目的研究具有內熱源的某產品包裝箱在不同壓力下的傳熱特性。方法搭建具有內熱源的某產品包裝箱傳熱特性實驗系統,對不同壓力下內部具有熱源的某產品包裝箱內的溫度場進行測量,討論產品各部件的傳熱特性,并基于計算結果,擬合各部件的傳熱關聯式。結果常壓狀態下各測點溫度較低壓狀態更易達到平衡,箱體內溫度場的分布符合被加熱物四周熱邊界層厚度分布規律。包裝箱內對流傳熱能力隨著壓強的增大而增強,且箱內壓強處于較小范圍時,壓強的增加對于箱內各部的冷卻效果更加顯著。結論正常工作的溫度范圍內,該產品包裝箱內傳熱能力的強弱主要受對流傳熱影響,對流傳熱能力隨著壓強的增大而增強;得到了各部件壁面?zhèn)鳠彡P(guān)聯式,誤差在5%以內。
[Abstract]:Aim to study the heat transfer characteristics of a product with internal heat source at different pressures. Methods an experimental system for the heat transfer characteristics of a product package case with internal heat source was set up. The temperature field in the package box with internal heat source was measured under different pressures, and the heat transfer characteristics of each component of the product were discussed, and the results were based on the calculation results. Fit the heat transfer correlation of each component. Results the temperature of the measured points at normal pressure is more easily balanced than that of low pressure, and the distribution of temperature field in the box conforms to the thickness distribution of the thermal boundary layer around the heated object. The convection heat transfer capacity in the box increases with the increase of pressure, and when the pressure in the box is in a small range, the cooling effect of each part of the box is more obvious when the pressure increases. Conclusion in the normal working temperature range, the heat transfer capacity in the package box is mainly affected by convection heat transfer, and the convection heat transfer ability increases with the increase of pressure, and the wall heat transfer correlation of each component is obtained, the error is less than 5%.
【作者單位】： 中國工程物理研究院總體工程研究所;重慶大學;
【基金】：中國工程物理研究院總體工程研究所創新與發展基金(14cxj20)
【分類號】：TB486
本文編號：2145049
[Abstract]:Aim to study the heat transfer characteristics of a product with internal heat source at different pressures. Methods an experimental system for the heat transfer characteristics of a product package case with internal heat source was set up. The temperature field in the package box with internal heat source was measured under different pressures, and the heat transfer characteristics of each component of the product were discussed, and the results were based on the calculation results. Fit the heat transfer correlation of each component. Results the temperature of the measured points at normal pressure is more easily balanced than that of low pressure, and the distribution of temperature field in the box conforms to the thickness distribution of the thermal boundary layer around the heated object. The convection heat transfer capacity in the box increases with the increase of pressure, and when the pressure in the box is in a small range, the cooling effect of each part of the box is more obvious when the pressure increases. Conclusion in the normal working temperature range, the heat transfer capacity in the package box is mainly affected by convection heat transfer, and the convection heat transfer ability increases with the increase of pressure, and the wall heat transfer correlation of each component is obtained, the error is less than 5%.
【作者單位】： 中國工程物理研究院總體工程研究所;重慶大學;
【基金】：中國工程物理研究院總體工程研究所創新與發展基金(14cxj20)
【分類號】：TB486
【相似文獻】
相關期刊論文 前4條
1 李棟;王煤;余徽;胡慧杰;紀平均;;非均勻內熱源對多孔介質中傳熱傳質的影響[J];四川化工;2006年01期
2 李棟;王煤;余徽;胡慧杰;;具有非均勻內熱源的多孔介質中自然對流傳熱的數值研究[J];計算機與應用化學;2006年07期
3 楊凡超;王洪偉;王彩玲;胡炳j;;第二類邊界條件下熱電偶非均勻內熱源的工程求解分析[J];紅外與激光工程;2013年S1期
4 ;[J];;年期
，本文編號：2145049
本文鏈接：http://sikaile.net/guanlilunwen/gongchengguanli/2145049.html
最近更新
教材專著
