本文選題：逆向工程 + D草圖　； 參考：《組合機床與自動化加工技術》2017年09期

【摘要】：目前,逆向工程技術已廣泛應用于產品的復制、仿制、改進和創新設計,是消化吸收先進技術和縮短產品設計開發周期的重要技術手段。對逆向工程中現有的曲面重建方法進行了研究,提出一種基于3D草圖提取與混合建模的曲面重建新思路。3D草圖由截面曲線、邊界曲線和特征曲線組成,包含了原始設計意圖和詳細的曲面重建信息。以Geomagic studio軟件為平臺,提取了3D草圖,然后將3D草圖交換至Solid Works中進行正向的參數化曲面重建,為基于逆向工程的復雜曲面重建和再設計提供了一種新的途徑。
[Abstract]:At present, reverse engineering technology has been widely used in product replication, imitation, improvement and innovative design, which is an important technical means to digest and absorb advanced technology and shorten product design and development cycle. The existing methods of surface reconstruction in reverse engineering are studied. A new method of surface reconstruction based on 3D sketch extraction and hybrid modeling is proposed. The 3D sketch consists of cross-section curve, boundary curve and characteristic curve. Contains original design intention and detailed surface reconstruction information. Based on Geomagic studio software, 3D sketches are extracted and exchanged to solid works for forward parametric surface reconstruction, which provides a new way for complex surface reconstruction and redesign based on reverse engineering.
【作者單位】： 廣東工業大學機電工程學院;廣東理工學院;
【基金】：廣東省科技計劃項目(2011A060901001,2014A040401078) 廣東省研究生教育創新計劃項目(2015SFKC23)
【分類號】：TB472;TP391.41

【相似文獻】

相關期刊論文 前1條

1 許開明 ,張哲;Arricam studio給攝影創作帶來更廣泛的應用空間[J];影視技術;2002年09期

，

本文編號：2086215