發布時間：2018-06-13 03:01

  本文選題：消聲器 + 響應面法　； 參考：《湖南大學學報(自然科學版)》2017年02期

【摘要】：為了改善聽小骨消聲器的消聲性能,并減輕質量,以消聲器低頻和寬頻的平均傳遞損失作為優化目標,以消聲器的結構參數(進出口管道寬度、封閉腔深度、封閉腔長度)作為優化變量,消聲器的質量作為約束條件,對其結構參數進行優化.建立了聽小骨消聲器的有限元模型,采用中心組合試驗設計獲得樣本點,利用響應面法構造二次多項式響應面模型,并檢驗了響應面模型的擬合精度.將響應面模型和NSGA-Ⅱ遺傳算法相結合對消聲器的結構參數進行了優化.優化后消聲器低頻和寬頻的消聲性能得到改善,質量減輕,表明了響應面法和遺傳算法相結合的消聲器結構參數優化方法的有效性.
[Abstract]:In order to improve the silencing performance and reduce the quality of the muffler, the average transmission loss of the muffler's low frequency and wide frequency is taken as the optimization objective, and the structural parameters of the muffler (the width of the inlet and outlet pipe, the depth of the closed cavity) are taken as the optimization objective. The length of the closed cavity is taken as the optimization variable and the quality of the muffler is taken as the constraint condition to optimize the structural parameters. The finite element model of the small bone muffler is established. The sample points are obtained by the center combination test. The quadratic polynomial response surface model is constructed by using the response surface method, and the fitting accuracy of the response surface model is tested. The response surface model and NSGA- 鈪，

本文編號：2012386