本文選題：排除浪費 + 布局規劃��； 參考：《華南理工大學》2014年碩士論文

【摘要】：分析制造業多年來的發展，我們可以看出，生產方式的轉換越來越快�？纯慈缃竦纳鐣圃鞗Q定市場的情形已經一起不復返，永遠地成為了歷史，現代制造業是以消費者為導向的，買方市場決定了賣方市場。而隨著人們生活水平的提高，人們對產品的要求也越來越高，除了產品的功能，價格等關鍵信息外，人們對產品的外觀，品牌，服務等的關注比重逐漸增加。關注就會帶來比較，而每個人都有不一樣的審美觀，不同的人對產品的需求各不一樣，這就給制造企業提出了更高的要求。多品種小批量的生產方式必將取代小品種多批量的生產方式。 P公司電吹風生產線是該工廠產量最大、人數最多的生產線，采用了典型的接力式生產模式，近年來由于產品多品種少批量的趨勢越來越明顯，以及總產量的增加，老式生產線已經無法滿足生產需求，急需對生產線進行調整，，以達成提高生產線產能的目的。 本文以P公司電吹風生產線產能提升研究為題，通過時間研究分析該生產線現狀存在的產能問題，然后通過排除浪費，布局規劃，線平衡分析，最終為該生產線制定了特殊的單元生產方式，通過將不同的單元生產方式結合，得到了一種最適合電吹風生產線的布局及生產方式。通過不斷循環改善，最終提高了該生產線13%的產能，滿足了客戶的需求，并且在小家電生產線中具備了一定的推廣意義。
[Abstract]:After analyzing the development of manufacturing industry for many years, we can see that the transformation of production mode is faster and faster. Looking at today's society, the situation where manufacturing determines the market is gone forever. Modern manufacturing is consumer-oriented, and the buyer's market determines the seller's market. With the improvement of people's living standards, people's demands on products are becoming higher and higher. In addition to the key information, such as function and price of products, the proportion of people's attention to product appearance, brand, service and so on is increasing gradually. Attention will bring comparison, and everyone has different aesthetic standards, different people have different demand for products, which puts forward higher requirements for manufacturing enterprises. The production mode of multi-variety and small batch will certainly replace the mode of production of small variety and multi-batch. The electric hair dryer production line of P Company is the production line with the largest output and the largest number of people in this factory, and adopts the typical relay production mode. In recent years, due to the trend of more and more varieties and fewer batches of products, and the increase of total output, the old production line has been unable to meet the production demand, so it is urgent to adjust the production line. In order to achieve the purpose of increasing production capacity of production line, this paper takes the research on capacity upgrading of electric hair dryer production line of P Company as a topic, analyzes the production capacity problems existing in the production line through time research, and then through eliminating waste, layout planning, line balance analysis, Finally, a special unit production mode is established for the production line. By combining different unit production methods, a layout and production mode that is most suitable for the production line of hair dryer is obtained. Through continuous circulation improvement, the capacity of the production line is raised by 13%, and the customer's demand is satisfied, and it has certain popularization significance in the production line of small household appliances.
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB497;F273;F426.6

【參考文獻】

相關期刊論文 前7條

1 孫建華,高廣章,蔣志強;生產線平衡的手段與方法研究[J];成組技術與生產現代化;2004年04期

2 孟志雷;葉春明;寧凝;;單元制造系統的操作工分配方法[J];工業工程;2009年01期

3 喻超;趙希男;;單元式生產方式分析及對策研究[J];工業工程與管理;2006年03期

4 蔣美仙;金壽松;馮定忠;魯建廈;;我國機械制造企業的單件流應用研究[J];工業工程與管理;2006年05期

5 杜運普,楊月新;裝配生產線的平衡問題研究[J];機械設計與制造;2003年02期

6 單汨源,周延齡;日本企業的現場管理[J];民族論壇;2002年04期

7 袁建新;企業現場改善的切入點[J];中國質量;2003年07期

本文編號：2003545