本文選題：液壓挖掘機 + 動臂�。� 參考：《液壓與氣動》2017年09期

【摘要】：為了更好地實現液壓挖掘機動臂與轉臺復合動作時的能量回收,對比了不同回收方式下的能量回收系統方案。在AMESim軟件中分別建立液壓式、電力式以及電液協調式能量回收系統的仿真模型,通過仿真分析綜合比較,提出了一種基于蓄能器-液壓馬達-發電機的液壓挖掘機電液協調式能量回收系統。研究結果表明:該系統的能量回收率達到了45.47%,能量再利用率達到了47.37%;能耗小,能量回收及再利用效率高,能更好地實現動臂與轉臺復合動作時的能量回收。
[Abstract]:In order to better realize the energy recovery of the hydraulic excavator when the moving arm and the rotary table are combined, the energy recovery system schemes under different recovery methods are compared. The simulation models of hydraulic, electric and electric-hydraulic coordinated energy recovery systems are established in AMESim software. An electro hydraulic coordinated energy recovery system of hydraulic excavator based on accumulator-hydraulic motor-generator is proposed. The results show that the energy recovery rate of the system is 45.47, the energy reuse ratio is 47.37, the energy consumption is low, the energy recovery and reuse efficiency is high, and the energy recovery can be better realized when the moving arm and the turntable are combined.
【作者單位】： 西南交通大學機械工程學院;
【分類號】：TH137;TU621

【相似文獻】

相關期刊論文 前1條

1 蔣曉夏,劉慶和;具有能量回收與重新利用功能的二次調節傳動系統[J];工程機械;1992年08期

，

本文編號：1951821