浮環密封流場數值模擬及泄漏率公式的修正
本文選題:浮環密封 + CFD ; 參考:《四川大學學報(工程科學版)》2016年01期
【摘要】:應用GAMBIT軟件,采用六面體網格和楔形網格的混合網格單元類型對節流間隙的計算區域進行網格劃分。使用FLUENT軟件,以層流模型為基礎,采用SIMPLE算法,對不同軸徑及工作參數下的浮環節流間隙進行了3維數值模擬。通過對模擬數據進行擬合處理,得到新的周向臨界雷諾數經驗計算公式和層流狀態下的泄漏量計算公式。研究表明,在其他參數不變情況下,泄漏量隨浮環偏心率、間隙高度、壓差的增大而增大,而軸的旋轉速度變化對泄漏量的影響很微小。研究結果為浮環密封的設計及進一步研究提供了參考。
[Abstract]:Using GAMBIT software, the calculation area of throttling gap is meshed with hexahedron mesh and wedge mesh. Using FLUENT software, based on laminar flow model and SIMPLE algorithm, 3D numerical simulation of floating link flow gap under different axial diameter and working parameters is carried out. By fitting the simulated data, a new empirical formula of circumferential critical Reynolds number and a formula for calculating leakage under laminar flow are obtained. The results show that the leakage rate increases with the increase of the eccentricity of the floating ring, the height of the clearance and the pressure difference, while the variation of the rotation speed of the shaft has little effect on the leakage rate. The results provide a reference for the design and further study of floating ring seal.
【作者單位】: 四川大學化學工程學院;
【分類號】:TB42
【相似文獻】
相關期刊論文 前10條
1 ;內冷式浮環密封試驗[J];化工與通用機械;1975年01期
2 ;浮環密封基本特性的研究[J];西安交通大學學報;1976年03期
3 王強,王月;國內、外浮環密封應用效果的比較[J];石油化工設備技術;2002年06期
4 賈江寧;陳志;李建明;董國光;郝靜;;浮環密封的結構分析及研究現狀[J];機械;2007年10期
5 ;浮環密封動力學特性實驗分析和計算[J];西安交通大學學報;1978年03期
6 陳建中;;高壓浮環密封試驗臺壓差控制系統[J];化工與通用機械;1981年04期
7 陳國良;;真空浮環密封裝置的試驗研究[J];真空科學與技術;1982年05期
8 劉志國;;浮環密封的熱態間隙[J];化工與通用機械;1981年03期
9 謝朝泉;;國外幾種浮環密封[J];煉油設備設計;1983年01期
10 杜志永;錐形浮環密封的特點及泵效作用[J];石油化工設備技術;1994年02期
相關重要報紙文章 前1條
1 唐偉;螺旋式浮環密封裝置國際首創[N];科技日報;2006年
相關碩士學位論文 前2條
1 張賢曉;螺旋槽流體動壓浮環密封特性分析[D];中國石油大學;2010年
2 吳沁;K102氫循環離心壓縮機浮環密封改造[D];蘭州理工大學;2005年
,本文編號:1929144
本文鏈接:http://sikaile.net/guanlilunwen/gongchengguanli/1929144.html