本文選題：覆膜產品 + 復合強度　； 參考：《包裝工程》2016年01期

【摘要】：目的定性并定量地分析影響覆膜產品復合強度的主要因素,提出覆膜過程中應注意的問題和利于提高復合強度的建議。方法采用數學分析中的正交試驗法,試圖找到最佳覆膜工藝參數,以提高覆膜強度。結果直觀最優工藝參數方案為復合溫度90℃、復合壓力20 MPa、復合速度800 r/min;位級最優工藝參數方案為復合溫度80℃、復合壓力20 MPa、復合速度800 r/min;可能最優工藝參數方案為復合溫度80℃、復合壓力25 MPa、復合速度800 r/min。合理的工藝選擇范圍是平印印刷品的墨層厚度在0~3μm時適宜選擇覆膜加工;復合溫度一般為85~95℃,墨層較厚時還應適當提高;復合壓力為20~30 MPa;復合速度為500~700 r/min。結論通過選擇最佳覆膜工藝參數,有效提高了包裝印品覆膜強度。
[Abstract]:Objective to qualitatively and quantitatively analyze the main factors affecting the composite strength of film mulching products, and put forward some problems that should be paid attention to in the process of film mulching and suggestions for improving the composite strength. Methods the orthogonal test method in mathematical analysis was used to find out the best technological parameters of film mulching in order to improve the strength of film mulching. Results the optimal process parameters were as follows: compound temperature 90 鈩，

本文編號：1924588