本文選題：超聲波測距算法 + 嵌入式系統�。� 參考：《電子技術應用》2016年08期

【摘要】：一種新型的適用于工程應用的超聲波接收端數字信號處理方案,算法思路是以巴特沃斯IIR數字濾波器作為輸入輸出端,并結合一種新型的包絡檢波及下采樣處理,文中歸結為五步算法。詳細介紹了各步算法的實現方法、工作原理以及必要性,并結合五步算法的特性給出了一種新型的計算回波渡越時間的點跡法,避開了軟件延時與實時性需求之間的矛盾。綜合仿真與實驗測試說明,此設計方案不僅可以有效濾除信道噪聲的干擾,而且可以準確提取包絡信息并記錄峰值到達時間,極大地滿足了超聲波測距系統的穩定性和實時性的需求。
[Abstract]:A new digital signal processing scheme for ultrasonic receiver, which is suitable for engineering applications, is proposed. The idea of the algorithm is to take the Butterworth IIR digital filter as the input and output terminal, and to combine a new kind of envelope detection and downsampling processing. This paper comes down to a five-step algorithm. The realization method, working principle and necessity of each step algorithm are introduced in detail, and a new point trace method for calculating echo transit time is given in combination with the characteristic of five-step algorithm, which avoids the contradiction between software delay and real-time requirement. The simulation and experimental results show that the proposed scheme can not only effectively filter the interference of channel noise, but also extract the envelope information accurately and record the peak arrival time. It can meet the need of stability and real-time of ultrasonic ranging system.
【作者單位】： 合肥工業大學電子科學與應用物理學院安徽省MEMS工程技術研究中心;合肥科盛微電子科技有限公司;
【基金】：國家863計劃項目(2013AA041101)
【分類號】：TB559

【相似文獻】

相關期刊論文 前8條

1 童艷利;蔣，

本文編號：1890467