本文選題：八桿機構 + 包裝機　； 參考：《機械設計與制造》2017年06期

【摘要】：在灌裝工位設計了一種適用于黃皮紙袋(單層袋)或者紙塑復合袋(雙層袋)的同步開袋機構,實現了黃皮紙外袋和塑料薄膜內袋的同步開袋和封袋,從而解決單層袋/雙層袋灌裝包裝生產線設計中如何同步開袋順利灌裝難題。利用機構學中平面多桿機構可以實現特定運動軌跡的思想,設計了一種在單個動力源作用下使末端兩執行連桿動作同步的八桿機構。基于Adams軟件的動力學仿真分析,當機構以不同速度運轉時,得到動力學特性符合設計要求。仿真分析得到的兩末梢執行連桿位移與制作實物試驗結果保持一致,從而驗證基于八桿機構設計出的這種面向單層袋或者雙層袋的同步開袋機構性能穩定。
[Abstract]:A synchronous bag opening mechanism suitable for yellow paper bag (single layer bag) or paper plastic composite bag (double layer bag) was designed at filling station. The synchronous opening and sealing of yellow paper outer bag and plastic film inner bag were realized. In order to solve the single bag / double bag filling packaging production line design how to simultaneously open the bag smoothly filling problem. Based on the idea that the planar multi-bar mechanism can realize the specific motion trajectory, an eight-bar mechanism is designed to synchronize the two end linkage movements under the action of a single power source. Based on the dynamic simulation analysis of Adams software, when the mechanism runs at different speeds, the dynamic characteristics meet the design requirements. The displacement of the two end actuators obtained by simulation is consistent with the experimental results, and the performance of the synchronous bagging mechanism which is designed based on the eight-bar mechanism is proved to be stable.
【作者單位】： 湖北工業大學機械工程學院;
【基金】：TRIZ創新理論在機電創新設計中的應用研究,湖北省科技支撐計劃項目(2013BKB010)
【分類號】：TB486

【相似文獻】

相關碩士學位論文 前1條

1 陳華;雙層袋自動化灌裝線的關鍵技術研究[D];湖北工業大學;2012年

，

本文編號：1782268