本文選題：鋼材打包機 + ABAQUS仿真�。� 參考：《天津理工大學》2017年碩士論文

【摘要】：鋼材作為一種原材料,在生產建設中具有重要作用。鋼材打包是鋼材生產的重要環節,而鎖扣的力學性能對鋼材的打包質量起關鍵作用。針對我國鋼材打包機種類少、造價貴等問題,研制出一種多功能、高效率、低消耗的包裝設備具有重要的現實意義和經濟價值。本文提出了一種新型鋼材打包機的鎖扣方式,并對打包機的關鍵技術進行了分析研究,最終完成了打包機的整體設計。本課題的主要研究內容如下:(1)對包裝機械行業的發展現狀進行了簡單介紹,確立了本課題的主要內容是對免扣無反扣打包機工作頭核心技術的討論研究。(2)制定了全自動免扣無反扣打包機的性能參數,通過分析工藝流程,確定了打包機的主要組成部分。(3)詳細研究了工作頭的鎖扣機構。完成了鎖扣機構的結構設計、力學分析,用Adams軟件對機構進行了運動仿真,以此優化了機構的主要參數;通過對咬刀刀刃的設計,討論了鎖扣的防脫方案,最后完成了咬刀所需剪切力的計算。(4)研究了免扣無反扣的力學性能。以理論分析為基礎,用Abaqus軟件對鎖扣進行了受力仿真,得到了鎖扣的力學特性以及連接強度,通過與其它鎖扣方式的連接強度比較,驗證了免扣無反扣力學性能的優越性。(5)設計了設備的控制系統。通過對打包機工藝流程的詳細分析,完成對各個執行元件邏輯關聯的設定,設計了控制系統邏輯關系圖、電氣原理圖、邏輯流程圖。最終將工藝流程分為確定的獨立功能模塊,實現控制系統模塊化設計。
[Abstract]:As a kind of raw material, steel plays an important role in production and construction.Steel packaging is an important part of steel production, and the mechanical properties of locking play a key role in the quality of steel packaging.In view of the problems such as few kinds of steel baling machines and expensive cost in our country, it is of great practical significance and economic value to develop a kind of multifunctional, high efficiency and low consumption packaging equipment.In this paper, a new locking mode of steel packing machine is put forward, and the key technology of the packing machine is analyzed and studied. Finally, the whole design of the packing machine is completed.The main research contents of this subject are as follows: (1) the present situation of packaging machinery industry is briefly introduced.The main content of this subject is to discuss and study the core technology of the working head of the no-buckling and non-buckling baling machine. (2) the performance parameters of the automatic no-buckling and non-buckling baling machine are formulated, and the technological process is analyzed.The main component of the baling machine is determined. (3) the locking mechanism of the working head is studied in detail.The structural design and mechanical analysis of the locking mechanism are completed, and the kinematic simulation of the mechanism is carried out by using Adams software to optimize the main parameters of the mechanism, and through the design of the knife blade, the anti-slip scheme of the locking mechanism is discussed.Finally, the calculation of the shear force required for the biting knife is completed. (4) the mechanical properties of the non-buckling without backbuckling are studied.Based on the theoretical analysis, the mechanical characteristics and connection strength of the locking are obtained by using the Abaqus software to simulate the mechanical properties of the locking, and the connection strength is compared with that of other locking modes.The superiority of the mechanical properties of no-buckling is verified. 5) the control system of the equipment is designed.Through the detailed analysis of the process flow of the baling machine, the logic relation diagram of the control system, the electrical schematic diagram and the logic flow chart are designed.Finally, the process is divided into determined independent functional modules to achieve the modular design of the control system.
【學位授予單位】：天津理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TB486

【相似文獻】

相關碩士學位論文 前1條

1 余智庭;免扣無反扣打包機的設計[D];天津理工大學;2017年

，

本文編號：1750261