本文選題：工業相機　切入點：圖像傳感器　出處：《現代電子技術》2017年22期

【摘要】：針對傳統的工業相機成本高昂、靈活性差的缺點,設計了基于FPGA的CMOS工業相機。在分析工業相機原理的基礎上設計了CMOS工業相機的硬件電路,利用FPGA配置圖像傳感器并采集圖像數據,然后在FPGA中緩存處理,最后通過Camera Link接口輸出圖像數據。仿真結果顯示,該相機可以以20 f/s的幀頻輸出960P的圖像數據,同時該相機可穩定連續工作,相機可將圖像處理算法移植進來,有著較好的靈活性。
[Abstract]:Aiming at the disadvantages of high cost and low flexibility of traditional industrial cameras, a CMOS industrial camera based on FPGA is designed, and the hardware circuit of CMOS industrial camera is designed on the basis of analyzing the principle of industrial cameras. The image sensor is configured with FPGA and the image data is collected and processed in FPGA. Finally, the image data is output through the Camera Link interface. The simulation results show that the camera can output 960P image data at the frame rate of 20 fs. At the same time, the camera can work stably and continuously, the camera can transplant the image processing algorithm in, and it has better flexibility.
【作者單位】： 寧波大紅鷹學院;
【基金】：國家自然科學基金青年項目(11505099) 浙江省自然科學基金資助項目(LQ14F040004)
【分類號】：TB852.1;TN791
，

本文編號：1693030