本文選題：星形密封圈　切入點：擋圈　出處：《流體機械》2017年08期 　論文類型：期刊論文

【摘要】：利用ANSYS軟件建立了帶聚四氟乙烯擋圈的丁腈橡膠星形密封圈結構的二維軸對稱幾何模型,分析了靜壓工作狀態和往復運動狀態下其密封機理、密封性能,并預測了星形密封圈易發生失效的具體部位。結果表明:在高壓(流體壓力10MPa)條件下,使用擋圈可以有效緩和星形密封圈的應力集中現象;星形密封圈非壓力側的內側凸圓靠近擋圈區域易發生磨損失效;內側的凹圓部位易發生撕裂失效。
[Abstract]:A two-dimensional axisymmetric geometric model of the star-shaped seal ring of NBR with PTFE retaining ring was established by using ANSYS software. The sealing mechanism and sealing performance of the ring under static pressure and reciprocating motion were analyzed. The results show that under the condition of high pressure (fluid pressure 10MPa), the stress concentration of star-shaped sealing ring can be alleviated effectively by using the baffle. The inner convex circle of the non-pressure side of the star sealing ring is prone to wear failure near the baffle region, while the inner concave circle region is prone to tear failure.
【作者單位】： 浙江工業大學過程裝備及其再制造教育部工程研究中心;上海航天控制技術研究所上海伺服系統工程技術研究中心;
【基金】：國家重點基礎研究計劃973項目(2014CB046404) 浙江省自然科學基金項目(LY14E050012)
【分類號】：TH137
，

本文編號：1643161