三疊片壓電復合換能器彎曲振動的比較研究
發布時間:2018-03-07 04:18
本文選題:瑞利法 切入點:諧振頻率 出處:《聲學技術》2017年04期 論文類型:期刊論文
【摘要】:用瑞利法對三疊片彎振圓盤換能器在三種不同邊界條件下的振動特性進行理論研究,推導了諧振頻率及有效機電耦合系數的表達式,通過數值計算分析了復合換能器的諧振頻率及有效機電耦合系數隨換能器各結構參數的變化規律并進行比較研究,同時將計算結果與有限元模擬結果比較,結果表明不同邊界條件下?lián)Q能器的結構參數對諧振頻率和有效機電耦合系數影響不同:在換能器結構參數一定時,自由邊界條件下諧振頻率最大,簡支邊界條件下最小,固定邊界條件下次之;有效機電耦合系數隨著金屬片厚度、陶瓷片厚度和陶瓷片半徑變化時,分別有一個最大值;其他參數一定時,有效機電耦合系數在簡支邊界條件下最大,自由邊界條件下的值稍大于固定邊界條件下的值。上述研究結果可為三疊片彎曲振動換能器的設計和實際應用提供一定的理論支持。
[Abstract]:By using Rayleigh method, the vibration characteristics of triple-laminated flexural disk transducer under three different boundary conditions are studied theoretically, and the expressions of resonant frequency and effective electromechanical coupling coefficient are derived. The variation of resonant frequency and effective electromechanical coupling coefficient of the composite transducer with the structural parameters of the transducer is analyzed and compared with that of the finite element simulation, and the calculated results are compared with the results of the finite element simulation. The results show that the structural parameters of the transducer have different effects on the resonant frequency and the effective electromechanical coupling coefficient under different boundary conditions: when the structural parameters of the transducer are fixed, the resonant frequency is the largest under the free boundary condition and the minimum under the simple boundary condition. Under the fixed boundary condition, the effective electromechanical coupling coefficient has one maximum value with the thickness of metal sheet, ceramic plate thickness and ceramic radius, and the effective electromechanical coupling coefficient is the largest under simply supported boundary condition when the other parameters are fixed. The value under free boundary condition is slightly larger than that under fixed boundary condition. The above results can provide some theoretical support for the design and practical application of triple-plate bending vibration transducer.
【作者單位】: 渭南師范學院數理學院;
【基金】:國家自然科學基金資助項目(11074158) 陜西省軍民融合研究基金項目(17JMR35) 渭南師范學院校級項目(17YKS08);渭南師范學院校級教改項目(JG201648)
【分類號】:TB552
【相似文獻】
相關期刊論文 前1條
1 朱錫南,葉奕坤,沈嘉祺;壓電陶瓷非剛度模機電耦合系數的附加串聯電容法測量[J];聲學技術;1984年01期
,本文編號:1577904
本文鏈接:http://sikaile.net/guanlilunwen/gongchengguanli/1577904.html
最近更新
教材專著