厚度振動模態優化設計
發布時間:2018-02-04 11:50
本文關鍵詞: 厚度振動 耦合作用 開孔圓片 出處:《聲學技術》2017年02期 論文類型:期刊論文
【摘要】:實際工作中,壓電陶瓷圓片振子的尺寸是有限的,振子在厚度振動基頻處與徑向振動高階模有較強的耦合作用。通過理論計算和有限元仿真分析耦合作用的影響。為優化厚度振動模態,提出在壓電圓片振子的中心打孔的方法,用孔徑大小來調節徑向高階振動頻率。實驗證明壓電圓片振子在中心打孔對優化厚度振動模態有效。
[Abstract]:In practical work, the size of piezoelectric ceramic wafer oscillator is limited. The vibrator has a strong coupling effect with the higher order mode of radial vibration at the fundamental frequency of thickness vibration. The effect of coupling action is analyzed by theoretical calculation and finite element simulation. In this paper, a method of perforating the center of piezoelectric disk oscillator is proposed, and the radial high order vibration frequency is adjusted by the size of the aperture. The experiment proves that the piezoelectric disk oscillator in the center hole is effective to optimize the vibration mode of thickness.
【作者單位】: 上海船舶電子設備研究所;水聲對抗技術重點實驗室;
【分類號】:TB565.1
【正文快照】: 高頻水聲換能器在多波束測深系統、反蛙人聲吶系統、圖像聲吶系統等水聲系統中有著廣泛應用[1]。厚度振動模態是高頻水聲換能器的主要工作模態[2]。在早期的理論分析中,常用一維振動理論來近似處理厚度極化的壓電陶瓷圓片振子的振動問題。當振子的厚度與直徑比很小時,這種近似,
本文編號:1490138
本文鏈接:http://sikaile.net/guanlilunwen/gongchengguanli/1490138.html
最近更新
教材專著