發布時間：2018-01-23 01:57

  本文關鍵詞： 環控系統 儲液器 多功能換熱器 能量調節 設計　出處：《合肥工業大學》2014年碩士論文　論文類型：學位論文

【摘要】：針對蒸汽壓縮/熱管復合型環控機組的研發需要，基于小型化、系統安全可靠性和良好的能量調節特性為目標，設計了一種兼為冷凝蒸發器和儲液器為一體的多功能殼管式換熱器。多功能殼管式換熱器管程為蒸發側，由數個獨立的制冷單元蒸發管簇組成，通過啟停制冷單元的數量來調控熱負荷的寬幅變化。殼程為冷凝側，第二制冷工質在室內側吸熱蒸發后回到換熱器，依次通過進口，均流板，蒸發管簇，被冷凝和過冷后儲存在殼程下部，經屏蔽泵輸送的用冷場所吸熱。該換熱器結構緊湊、換熱穩定、工作可靠，依靠調節供液量和供液溫度能快速響應被控對象熱負荷變化。 課題主要工作內容有：（1）收集分析國內外技術資料，根據用戶需求及空調對象負荷特性，為熱管復合型環控機組用多功能殼管式換熱器設計提供依據；（2）根據熱管復合型環控機組運行原理及控制需求，提出多功能殼管式換熱器設計方案；進行60kw多功能殼管式換熱器設計，并對60kw熱管復合型實驗平臺進行設計；（3）進行實驗機組平臺搭建，對工程樣件進行性能測試。課題取得階段性成果：1）根據熱管復合型環控機組運行控制理論，完成多功能殼管式換熱器的設計，并試制了換熱器樣件；2）完成60kw熱管復合型環控機組的實驗平臺設計，結合多功能殼管式換熱器進行了實驗平臺的搭建；3）對多功能殼管式換熱器進行性能實驗，并結合整機對實驗結果進行分析。 實驗表明多功能殼管式換熱器滿足了熱力設計要求，換熱性能良好，穩定性高，易于實現對熱管循環中循環泵的精確控制，在壓縮制冷模式下對冷量需求可以通過啟停制冷單元數量來靈活控制，有利于機組節能。
[Abstract]:In order to meet the research and development needs of steam compression / heat pipe composite environmental control unit, it is based on miniaturization, system safety and reliability and good energy regulation characteristics. A kind of multifunctional shell and tube heat exchanger is designed, which is a condenser and a liquid storage unit. The tube side of the multi-function shell and tube heat exchanger is evaporative side, which is composed of several independent evaporative tube clusters of refrigeration units. The shell side is the condensation side, the second refrigerant returns to the heat exchanger after endothermic evaporation at the indoor side, and then through the inlet, the flow sharing plate, and the evaporative tube cluster. The heat exchanger is stored in the lower part of the shell after condensation and undercooling and absorbed heat in the cooling place transported by shield pump. The heat exchanger has compact structure stable heat transfer and reliable operation. By adjusting the amount of liquid supply and the temperature of liquid supply, we can quickly respond to the change of heat load of the controlled object. The main work of this paper is to collect and analyze the technical data at home and abroad, and to provide the basis for the design of multi-function shell and tube heat exchanger for heat pipe compound environmental control unit according to the demand of users and the load characteristics of air conditioning objects. 2) according to the operation principle and control requirement of heat pipe compound environmental control unit, the design scheme of multi-function shell tube heat exchanger is put forward. The 60kW multifunctional shell and tube heat exchanger is designed, and the 60kw heat pipe compound experimental platform is designed. The platform of the experimental unit is built and the performance of the engineering sample is tested. The subject has achieved the stage result: 1) according to the operation control theory of the heat pipe composite environmental control unit. The design of the multifunctional shell and tube heat exchanger is completed, and the sample of the heat exchanger is produced. 2) the experimental platform of 60kW heat pipe compound environmental control unit is designed, and the experimental platform is built in combination with multi-function shell tube heat exchanger. 3) the performance experiment of multifunctional shell-tube heat exchanger is carried out, and the experimental results are analyzed in combination with the whole machine. The experimental results show that the multi-function shell and tube heat exchanger meets the requirements of thermal design, has good heat transfer performance, high stability, and is easy to realize the accurate control of the circulating pump in the heat pipe cycle. In the compression refrigeration mode, the demand for cooling capacity can be flexibly controlled by the number of starting and stopping refrigeration units, which is beneficial to the energy saving of the unit.
【學位授予單位】：合肥工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB657.5

【參考文獻】

相關期刊論文 前10條

1 魏三強;朱軍;;一種通信機房空調節能降耗技術方案設計[J];重慶理工大學學報(自然科學);2012年06期

2 侯福平;;通信機房空調系統節能技術探討[J];電信技術;2006年06期

3 董峰;;高性能計算機機房專用空調節能措施的探討[J];電信技術;2008年02期

4 李長云;;利用自然冷源進行隔絕換熱的節能措施[J];電信技術;2008年08期

5 李智文;電信機樓使用雙冷源系統的實踐和分析[J];廣東通信技術;2000年05期

6 王鐵軍;王冠英;王蒙;王俊;趙紹博;劉宏宇;王飛;李宏洋;;高性能計算機用熱管復合制冷系統設計研究[J];低溫與超導;2013年08期

7 楊峻青;朱先俊;;水系統管路設計原則及應用[J];工業水處理;2007年10期

8 梁超國;屏蔽泵的結構、原理及其應用[J];化工設備設計;1998年01期

9 劉乾;劉陽子;;管殼式換熱器節能技術綜述[J];化工設備與管道;2008年05期

10 管勇;陳超;許磊;張麗莉;尹龍濱;;自然冷卻換熱技術應用于通信機房空調系統的實驗研究[J];建筑科學;2010年10期

，

本文編號：1456364